Close
Filters
Search

A/C leakage stop additive

Article No. 0892764500
Air conditioning leakage stop additive SEAL-A/C-LEAKSTOPADDITIVE-30ML
€10.25 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

TCP reduces wear

  • Longer compressor service life
  • Improves the compressor service life
  • Reduces noises developing in the compressor
  • (Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)

Compatible with PAG and ester oil

Notice

Not suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For preventative use, to seal slightly perished and brittle O-rings in R134a air-conditioning units.

TCP reduces wear

  • Longer compressor service life
  • Improves the compressor service life
  • Reduces noises developing in the compressor
  • (Tri-cresyl-phosphate) Additive specifically developed for vehicle air-conditioning compressors for reducing mechanical wear (friction) in the compressor (piston etc.)

Compatible with PAG and ester oil

Notice

Not suitable for sealing leaks on metallic components (evaporator, compressor, condenser etc.).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Connect the A/C leakage stop additive to the adapter, insert into the application gun and mix in via the high-pressure side of the cooling system (engine must be switched off).

Products specifications
Contents 730 ml
Smell/fragrance Odourless
Chemical basis Methylene diphenyl
Water-soluble Yes
Vapour pressure 1.33 Pa
Conditions for vapour pressure at 20°C
Colour Light yellow transparent
Min. flashing point 255 °C
Density 1.02 g/cm³
Viscosity/consistency Liquid
Shelf life from production 48 Month

Datasheets(1)

Safety data sheet 1

Products specifications
Contents 730 ml
Smell/fragrance Odourless
Chemical basis Methylene diphenyl
Water-soluble Yes
Vapour pressure 1.33 Pa
Conditions for vapour pressure at 20°C
Colour Light yellow transparent
Min. flashing point 255 °C
Density 1.02 g/cm³
Viscosity/consistency Liquid
Shelf life from production 48 Month
Close