• AOX-free
• No
• Yes

• Application temperature
• +5°C to +40°C

• Bio-degradable
• 95%
• No
• Yes

• Building material class
• A2/B1 - Non-flammable
• B1 - Of low flammability
• B2 - Normally inflammable
• B3 - Of high flammability
• B3

• Building material class conditions
• A2 = to metal substrates / B1 = to least flame retardant aluminium-coated mineral fibre products
• in accordance with DIN 4102, according to test certificate 230008667
• in accordance with DIN 4102

• Calculated consumption
• 250 g/ m2 – 156 ml/m2 - 80 μ

• Calculated coverage
• 3.9 m2/kg – 6.24 m2/l - 80 μ

• Category
• Top Seller

• Chemical basis
• 1-POP mixed polymer
• 2-methoxy-1-methylethyl acetate
• 2-propanol
• 2-propanol, white spirit, ketone
• Acetate-curing sealant
• Acetone
• Acrylate dispersion
• Acrylated alkyd combination
• Acrylic resin
• Acrylic resin dispersion
• Acrylic resin paint
• Aliphatic hydrocarbon
• Alkaline surfactants, silicone oil
• Alkaline tenside
• Alkyd resin
• Amidosulfonic acid
• Ammoniacal surfactant
• Amphoteric tenside
• Anionic tenside
• Bitumen
• Bitumen sealing compound
• Butoxyethanol
• Butyl natural rubber
• Closed-cell polyethylene foam
• Combination of additives
• Compound of polymer and natural resin
• Cyanoacrylate acidic ester
• Diethyl ether
• Dimethacrylic acid ester
• Dimethacrylic acid ether
• Epoxy
• Epoxy resin
• Ethyl cellulose synthetic resin
• Ethyl vinyl acetate
• Ethyl-2-cyanoacrylate monomer
• Ethylene glycol
• Fatty alcohols
• Fine open-cell polyurethane foam
• Fixed metallic zinc dust
• Fluorocarbon resin
• Glycol and polyglycol ether, additives
• Hybrid polymer
• Hydrocarbon
• Hydrocarbonate
• Isoalkane
• Isopropanol
• Lithium 12 hydroxystearate
• Medic white oil with synthetic oils
• Methacrylic acid ether
• Methyl acetate
• Methylene diphenyl
• Mineral oil
• Mineral oil with polybutene
• Mineral oil with synthetic ester
• Mineral oil, paraffin waxes and corrosion protection additives in dearomatized gasoline hydrocarbons
• Mix of polyether polyols, diphenylmethane-4, 4'-diisocyanate
• Mixed synthetic mineral oil with organic thickener and white solid lubricant combination
• Mixture of surfactants and selected complex compounds
• Modified alkyd resin
• Moisture curing 1K polyurethane
• Moisture-hardening polyurethane prepolymer
• Monocarboxylic acid esters
• MS polymer
• Naphtha
• Natural rubber
• Nitrile rubber
• Nitrite combination resin
• Nitro cellulose basis
• Nitroalkydale
• Nonionic tenside
• Phosphoric acid, non-ionic surfactants
• Physiologically harmless synthetic oil
• Polyacrylic dispersion
• Polyamide
• Polychloroprene
• Polyester
• Polyester resin
• Polyethylene
• Polyisobutylene
• Polytetrafluoroethylene
• Polyurethane
• Polyurethane formulation that contains solvents
• Polyvinyl butyral
• POP mixed polymer
• Propane
• Resin
• Silane modified polymer
• Silicone resin
• Single component polyurethane
• Soft metal-containing semi-synthetic base grease
• Soft wax
• Solvent mixture with additives
• Solvent neoprene
• Special benzine with D-limonene
• Styrene
• Surfactants, ester
• Synthetic natural rubber
• Synthetic oil
• Synthetic oil with a multifunction additive combination
• Synthetic rubber
• Synthetic wax oxidant
• Tetrafluorpropene
• Two-component polyurethane
• Two-component resin
• Urethane acrylate
• Vinyl chloride polymer
• Water
• Water and alkaline tenside
• Water glass luting with mineral fillers
• Water tenside
• Water, soap and glycol
• Water-carbon emulsion
• Wax
• White oil with additives
• Neutral crosslinked silicones, oxime-based
• Neutrally networked silicones, with alkoxy basis (alcohol basis)
• Sauer silicones (acetate systems)
• Polyvinyl acetate dispersion
• Water and propanol
• Mix of organic solvents

• Chemical basis
• Aqueous mixture

• Chemical basis
• Aqueous mixture

• Chemical basis
• Methacrylate

• Chemical basis
• Mineral oil

• Chemical basis
• Mineral oil

• Chemical basis
• Polydimethylsiloxane

• Chemical basis
• Silane modified polymer

• Chemical basis
• Synthesis of fat and additives in hydrocarbon solvents

• Chemical basis
• Synthetic oil

• Chemical basis
• Wax

• Coating thickness
• 30 µm
• 40 µm
• 7 µm

• Coats
• two-three

• Colour
• Alder, medium
• Aluminium (base material)
• Aluminium silver
• Amber
• Anthracite
• Anthracite (base material)
• Anthracite, metallic
• Ash bright
• Bahama beige
• Beech, dark
• Beige
• Beige (base material)
• Black
• Black (base material)
• Black Fiat 120
• Black<br>Red
• Blue (base material)
• Blue fluorescent
• Blue grey RAL 7031
• Blue grey RAL 7031<br>Window grey RAL 7040<br>Grey white RAL 9002<br>Light grey RAL 7035<br>Signal white RAL 9003<br>Pure white RAL 9010<br>Traffic white RAL 9016<br>Cream RAL 9001<br>Oyster white RAL 1013<br>Agate grey
• Brass coloured
• Bronze green RAL 6031
• Brownish
• Cast grey
• Cherry tree, middle
• Clear
• Colza Yellow RAL 1021
• Concrete grey
• Copper
• Copper beech<br>Cherry
• Cream
• Cream RAL 9001
• Dark grey
• Dark grey VW 115
• Deep dark grey MB 167
• Emerald green RAL 6001
• Flame red RAL 3000
• Green
• Green fluorescent
• Green<br>Blue
• Grey RAL 7037
• Grey white RAL 9002
• Grey<br>Black
• Grey<br>Orange
• Hammered gold
• Hornbeam<br>Spruce, medium
• Jasmine
• Jet black RAL 9005
• Light beige
• Light green
• Light grey (bright grey)
• Light grey RAL 7035
• Light grey<br>Black
• Light ivory
• Light yellow
• Light yellow transparent
• Luminous bright red RAL 3026
• Luminous yellow
• Mahogany
• Maple, middle-reddish
• Maple, nature
• Maple<br>Birch
• Medium grey
• Milky-transparent (protective film)
• Neon blue
• Neon orange
• Neon pink
• Neon red
• Neon yellow
• Oak
• Oak bright
• Orange
• Orange fluorescent
• Oyster white RAL 1013
• Pear, dark
• Pear, middle
• Pearl mouse grey RAL 7048
• Pebble grey RAL 7032
• Pine
• Pure orange RAL 2004
• Pure white RAL 9010
• Purple
• Red brown
• Red<br>Black
• Red<br>White
• Rosy
• Satin black VW 110
• Sen ash
• Signal white, similar to RAL 9003
• Silk grey
• Silver coloured
• Silver grey
• Silver grey RAL 7001
• Sky blue RAL 5015
• Stainless steel coloured<br>Chrome coloured
• Tile white
• Traffic blue RAL 5017
• Traffic white RAL 9016
• Transparent (base material)
• Transparent (hardened)
• Transparent, high gloss
• Transparent, silk matt
• Transparent, translucent, opaque
• Transparent/slightly cloudy (hardened)
• Transparent<br>Red
• Violet
• Walnut, medium
• Wheel silver
• White (base material)
• White grey
• White<br>Transparent
• Whitish
• Yellow (base material)
• Yellow fluorescent
• Yellow green
• Yellow olive (NATO green) RAL 6014
• Yellow orange
• Yellow transparent
• Yellow<br>Brown
• Yellow-black
• Yellowish
• Zinc
• Zinc, bright
• Beech, middle
• Blue
• Brown
• Clear<br>Light yellow
• Dark brown
• Deep black
• Grey
• Mahogany, dark
• Oak, brownish
• Oak, dark
• Oak, medium
• Oak, rustic
• Walnut, antique
• Walnut, dark
• White
• White
• Yellow
• Terracotta
• Crystal clear
• Transparent
• Aluminium coloured
• Manhattan
• Colourless
• Light brown
• Neon green
• Red

• Colour
• Colza yellow RAL 1021

• Conditions for dust-drying time
• at 20°C, 50% relative humidity
• at recommended dry layer thickness

• Conditions for resistance in salt-spray test
• in accordance with DIN 50021

• Conditions to maintain shelf life from production
• at 10°C to 25°C
• at 10°C to 35°C and max. 60% relative humidity
• at 10°C to 35°C, no exposure to sunlight, no heat sources
• at 15°C to 25°C and max. 60% relative humidity
• at 20°C
• at 20°C and 50% humidity
• at 20°C and 50% relative humidity
• at 5°C to 25°C
• at 5°C to 30°C
• at max. 25°C
• at min. -15°C, slow defrosting time
• at room temperature, in the original container
• cool and dry storage area
• cool and dry storage area below 25°C
• cool and dry storage area, no exposure to sunlight, 15°C to 25°C
• dry and dust-free storage area, 20°C and 50% relative humidity
• dry storage area
• dry storage area, 20°C
• Dry, at room temperature
• dry, lying and dust-free storage area, 20°C and 50% humidity
• dry, lying and dust-free storage area, protected from UV rays, 20°C and 50% humidity
• dry, lying, dust-free storage area, 20°C and 50% relative humidity
• frost-free storage area, no exposure to sunlight
• in sealed cartridge, max. 30°C
• storage area that is dry, dust-free, protected from sunlight and other heat sources, approx. 20°C, 50% humidity
• well-ventilated storage area, 20°C
• at room temperature
• at 10°C to 30°C
• at 5°C to 35°C

• Connection thread
• 1/4 inch

• Container
• Aerosol can in a display box
• Bottle
• Bucket
• Canister
• Cartridge
• Cartridge Lube Shuttle
• Hand spray
• Plastic bottle
• Plastic bottle in a display box
• Plastic canister
• Round bottle
• Spray bottle
• Spray can
• Stick
• Tube
• Bag
• Aerosol can
• Can
• Double cartridge

• Container
• Cartridge

• Container
• Cartridge

• Container
• Cartridge

• Contents
• 0.15 l
• 0.3 l
• 0.4 l
• 0.5 l
• 1 l
• 1.5 ml
• 10 l
• 100 ml
• 1064 ml
• 1120.8 ml
• 1282.1 ml
• 1300ml
• 1400 ml
• 150 ml
• 185 ml
• 195 ml
• 20 ml
• 200 ml
• 210 ml
• 225 ml
• 2300 ml
• 235 ml
• 286 ml
• 30 l
• 300 ml
• 32 ml
• 4.8 l
• 400 ml
• 4000 ml
• 44 ml
• 44.4 ml
• 5 l
• 50 l
• 590 ml
• 600 ml
• 65.5 ml
• 7.5 ml
• 70 ml
• 730 ml
• 75 ml
• 750 ml
• 1000 ml
• 310 ml
• 385 ml
• 290 ml
• 250 ml
• 500 ml
• 20 l
• 50 ml
• 204.08 ml

• Contents
• 0.5 l

• Contents
• 1000 ml

• Contents
• 195 ml

• Contents
• 20 l

• Contents
• 20 l

• Contents
• 200 ml

• Contents
• 210 l

• Contents
• 300 ml

• Contents
• 310 ml

• Contents
• 400 ml

• Contents
• 400 ml

• Contents
• 400 ml

• Contents
• 400 ml

• Contents
• 500 ml

• Contents
• 600 ml

• Contents
• 75 ml

• Cross-cut test
• MAN 0-1

• Cross-cut test conditions
• in accordance with DIN 53151

• Density
• 0.001 g/l
• 0.568 g/cm³
• 0.57 g/cm³
• 0.6 g/cm³
• 0.659 g/cm³
• 0.665 g/cm³
• 0.673 g/cm³
• 0.698 g/cm³
• 0.7 g/cm³
• 0.71 g/cm³
• 0.714 g/cm³
• 0.739 g/cm³
• 0.74 g/cm³
• 0.742 g/cm³
• 0.75 g/cm³
• 0.76 g/cm³
• 0.762 g/cm³
• 0.766 g/cm³
• 0.767 g/cm³
• 0.77 g/cm³
• 0.775 g/cm³
• 0.776 g/ml
• 0.786 g/cm³
• 0.79 g/cm³
• 0.794 g/cm³
• 0.799 g/cm³
• 0.8 g/cm³
• 0.813 g/cm³
• 0.814 g/cm³
• 0.83 g/cm³
• 0.835 g/cm³
• 0.839 g/cm³
• 0.842 g/cm³
• 0.843 g/cm³
• 0.845 g/cm³
• 0.85 g/ml
• 0.855 g/cm³
• 0.855 g/ml
• 0.868 g/cm³
• 0.871 g/cm³
• 0.878 g/cm³
• 0.88 g/cm³
• 0.883 g/cm³
• 0.889 g/cm³
• 0.893 g/cm³
• 0.896 g/cm³
• 0.9 g/cm³
• 0.904 g/cm³
• 0.92 g/cm³
• 0.93 g/cm³
• 0.97 g/cm³
• 0.973 g/cm³
• 0.981 g/cm³
• 0.99 g/cm³
• 0.992 g/cm³
• 1 kg/l
• 1 kg/m³
• 1.01 g/cm³
• 1.011 g/cm³
• 1.023 g/cm³
• 1.03 g/cm³
• 1.035 g/cm³
• 1.039 g/cm³
• 1.04 g/cm³
• 1.05 g/cm³
• 1.06 g/cm³
• 1.068 g/cm³
• 1.07 g/cm³
• 1.08 g/cm³
• 1.09 kg/m³
• 1.095 g/ml
• 1.109 g/cm³
• 1.11 g/cm³
• 1.12 g/cm³
• 1.18 g/cm³
• 1.18 g/ml
• 1.21 g/cm³
• 1.25 g/cm³
• 1.27 g/cm³
• 1.35 kg/l
• 1.4 g/cm³
• 1.4 kg/l
• 1.404 g/cm³
• 1.5 g/cm³
• 1.52 g/cm³
• 1.54 g/cm³
• 1.556 g/cm³
• 1.57 g/cm³
• 1.59 g/cm³
• 1.592 g/cm³
• 1.606 g/cm³
• 1.75 g/cm³
• 1.8 g/cm³
• 1.85 g/cm³
• 1.858 g/cm³
• 1000 g/cm³
• 2.09 g/cm³
• 2.21 g/cm³
• 2.8 kg/m³
• 0.81 g/cm³
• 0.94 g/cm³
• 0.78 g/cm³
• 1 g/cm³
• 1.1 g/cm³
• 1.2 g/cm³
• 1.02 g/cm³
• 1.09 g/cm³
• 1.26 g/cm³
• 0.86 g/cm³

• Density conditions
• at 15°C
• at 25°C
• Components A and B mixed
• at 20°C
• at 23°C, 50% relative humidity

• Density/conditions
• 0.61 g/cm³ / at 20°C
• 0.66 g/cm³ / at 20°C
• 0.678 g/cm³ / at 20°C
• 0.69 g/cm³ / at 20°C
• 0.698 g/cm³ / at 15°C
• 0.71 g/cm³ / at 20°C, EN 542
• 0.714 g/cm³ / at 20°C
• 0.72 g/cm³ / at 20°C
• 0.749 g/cm³ / at 20°C
• 0.75 g/cm³ / at 20°C
• 0.78 g/cm³ / Active substance, 20°C
• 0.785 g/cm³ / Active substance, 20°C
• 0.79 g/cm³ / at 20°C
• 0.81 g/cm³ / at 20°C
• 0.83 g/cm³ / at 20°C
• 0.88 g/cm³ / at 20°C
• 0.9 g/cm³ / at 20°C, EN 542
• 0.919 g/cm³ / at 20°C
• 0.93 g/cm³ / at 20°C
• 0.97 g/cm³ / at 20°C
• 0.99 g/cm³ / at 20°C, 50% relative humidity
• 0.999 g/cm³ / at 20°C
• 1.03 g/cm³ / at 20°C
• 1.04 g/cm³ / at 20°C
• 1.05 g/cm³ / at 20°C
• 1.08 g/cm³ / at 20°C
• 1.08 kg/l / at 20°C
• 1.09 g/cm³ / at 20°C
• 1.14 g/cm³ / at 20°C
• 1.15 g/cm³ / at 20°C
• 1.15 g/cm³ / at 23°C, 50% relative humidity
• 1.18 g/cm³ / at 20°C
• 1.25 g/cm³ / prior to hardening, DIN 53479
• 1.45 g/cm³ / at 20°C, EN 542
• 1.48 g/cm³ / at 23°C, 50% relative humidity
• 1.54 g/cm³ / at 20°C
• 1 g/cm³ / at 20°C
• 0,89 g/cm³ / at 20°C

• Diameter
• 11.5 mm
• 12 mm

• Diameter (Ø)
• 22 mm
• 30 mm
• 8 mm
• 10 mm
• 15 mm
• 20 mm

• Dielectric strength
• 16 kV/mm

• Dry film thickness
• 80÷100 μ (160÷200 wet)

• Dry layer thickness (first back-and-forth motion)
• 25 µm
• 30 µm
• 36 µm
• 40 µm
• 7 µm

• Drying times (25°C - 70°F - 50% U.R.)
• To touch: 1-2 hrs | To recoat: 12 hrs | Launch time: 24 hours

• Dust-drying time
• 15 min
• 5 min
• 6 min
• 7 min
• 10 min

• Full curing speed
• 0.5 mm/d
• 1 mm/d
• 1.5 mm/d
• 3 mm/d
• 2.5 mm/d

• Fully hardening/curing conditions
• At recommended dry layer thickness
• Room temperature
• 23°C and 50% relative humidity

• Gloss level
• Glossy
• High gloss
• Matt
• Satin matt
• Semi-matt

• Grip strength conditions
• at recommended dry layer thickness

• Halogen-free
• Yes

• Hardness Shore A
• 20–25

• Height
• 330 mm
• 190 mm
• 220 mm
• 430 mm
• 240 mm

• Length
• 1.330 mm
• 10 m
• 11 cm
• 110 mm
• 13 cm
• 175 mm
• 180 mm
• 20 m
• 200 mm
• 230 mm
• 238 mm
• 25 m
• 26 m
• 3.65 m
• 33 m
• 33.5 mm
• 340 mm
• 350 mm
• 370 mm
• 60 mm
• 66 m
• 73 mm
• 74 mm
• 8 m
• 80 mm
• 9 cm
• 90 m
• 12.5 cm
• 10.5 cm
• 100 mm
• 310 mm
• 100 m
• 50 m
• 115 mm

• Liquid volume
• 2.3 l

• Material
• Closed cell polyethylene
• Fibre glass
• Metall/Kunststoff
• Nylon (polyamide)
• PE - Polyethylene
• Plastic impact-resistant
• Plastics - Polyamide PA
• Polypropylene - PP / polyamide - PA
• Polypropylene / velour
• PP - Polypropylene
• Metal
• Plastic
• Steel
• PA - Polyamide
• Zamak

• Material
• Plastic

• Material of the grip handle
• Polyethylene

• Max. curing time
• 12 h
• 6 h
• 8 h
• 3 h

• Max. grip strength
• 20 min

• Max. temperature resistance of the hardened material
• 120 °C
• -15 °C
• 80 °C
• 70 °C

• Max. tensile strength
• 300 kPa

• Min. curing time
• 1 h
• 10 h
• 4 h
• 6 h

• Min. flashing point
• 10 °C
• -10 °C
• 101 °C
• 12 °C
• 130 °C
• -15 °C
• 170 °C
• -18 °C
• 181 °C
• -19 °C
• 190 °C
• -20 °C
• 200 °C
• 21 °C
• -22 °C
• 228 °C
• 230 °C
• 24 °C
• -24 °C
• 240 °C
• -25 °C
• 250 °C
• 255 °C
• -26 °C
• 27 °C
• 30 °C
• -30 °C
• 32 °C
• 38 °C
• -4 °C
• 40 °C
• -42 °C
• 45 °C
• -60 °C
• 61 °C
• 62 °C
• 63 °C
• 70 °C
• 76 °C
• -80 °C
• 88 °C
• 90 °C
• -90 °C
• -92 °C
• -97 °C
• 100 °C
• 80 °C
• -14 °C

• Min. grip strength
• 14 min
• 15 min
• 20 min
• 25 min
• 40 min
• 45 min

• Min. skin-formation time
• 15 min
• 20 min
• 25 min
• 30 min
• 45 min
• 48 h
• 5 min
• 6 min
• 60 min
• 65 min
• 8 min
• 75 min
• 10 min

• Min. temperature conditions
• -10 °C
• -15 °C
• -180 °C
• -20 °C
• -25 °C
• -40 °C
• -45 °C
• -5 °C
• -80 °C
• 5 °C
• 15 °C
• -30 °C

• Min. temperature resistance of the hardened material
• -20 °C

• Min./max. grip strength
• 15-20 min

• Min./max. joint width
• 4 x 5 mm

• Min./max. temperature conditions
• -15 to 130 °C
• -15 to 150 °C
• -30 to 130 °C
• -30 to 140 °C
• -30 to 80 °C
• -40 to 180 °C
• -45 to 180 °C
• -5 to 40 °C
• -50 to 250 °C
• -55 to 150 °C
• 10 to 60 °C

• Min./max. temperature resistance
• -10 to 60 °C
• -10 to 70 °C
• -18 to 90 °C
• -20 to 110 °C
• -20 to 125 °C
• -20 to 75 °C
• -20 to 80 °C
• -25 to 70 °C
• -25 to 80 °C
• -30 to 100 °C
• -30 to 110 °C
• -30 to 120 °C
• -30 to 80 °C
• -30 to 90 °C
• -40 to +100 °C
• -40 to +90 °C
• -40 to 100 °C
• -40 to 105 °C
• -40 to 120 °C
• -40 to 180 °C
• -40 to 85 °C
• -40 to 95 °C
• -5 to 1000 °C
• -50 to 250 °C
• -50 to 280 °C
• -55 to 105 °C
• -55 to 120 °C
• -55 to 150 °C
• -60 to 260 °C
• -60 to 315 °C
• -40 to 80 °C
• -40 to 130 °C
• -60 to 100 °C
• -40 to 150 °C
• -40 to 140 °C
• -40 to 90 °C

• Number of pieces in assortment/set
• 10 PCS
• 2 PCS
• 20 PCS

• Oil basis
• Medical white oil
• Mineral oil
• Synthetic
• Synthetic hydrocarbons
• Synthetic mineral oil
• Synthetic wax

• pH value
• 0.4
• 1.6
• 10.2
• 10.6-11.0
• 11.2
• 11.47
• 12.1
• 13
• 3
• 5.7
• 5-5.5
• 6
• 6.5-7.5
• 6.6
• 6.6-6.8
• 6.8
• 6-7
• 7
• 7.5
• 7.5-8.5
• 7.8
• 8
• 8.0-9.0
• 8.3
• 8.5
• 9.3
• 9.4
• 9.76
• Slightly acidic
• 5.5
• 5
• 9.5

• pH-neutral
• No
• Yes

• Product weight (per item)
• 0.359 kg
• 1.54 g
• 1.848 g
• 1298 g
• 134 g
• 136 g
• 23 g
• 308.583 g
• 32 kg
• 32.500 g
• 379 g
• 4107 g
• 45 g
• 535 g
• 543.125 g
• 5466 g
• 576 g
• 582 g
• 61000 g
• 74 g
• 76 g
• 954 g
• 80 g

• Purity rating zinc
• 99 %
• 99.99 %

• Quantity
• 1 Ltr

• Recoatable/Can be painted over
• Conditional, preliminary testing required
• Yes, after 15-20 minutes
• Yes
• No

• Resistance in salt-spray test
• 250 h
• 500 h

• Shelf life from production
• 15 Month
• 36 Month
• 48 Month
• 72 Month
• 9 Month
• 90 Month
• 99 Month
• 24 Month
• 12 Month
• 60 Month
• 18 Month

• Shelf life from production/conditions
• 12 Month / at 10°C to 25°C
• 12 Month / at 15°C to 25°C
• 12 Month / at 20°C and 50% humidity
• 12 Month / at 5°C to 25°C
• 12 Month / at max. 25°C
• 12 Month / at room temperature
• 12 Month / cool and dry storage area
• 12 Month / cool, dry and frost-free storage area
• 15 Month / at 5°C to 35°C
• 18 Month / at 15°C to 25°C
• 18 Month / at 5°C to 25°C
• 24 Month / at 10°C to 30°C
• 24 Month / at 20°C
• 24 Month / at 20°C and 50% humidity
• 24 Month / at 23°C and 50% relative humidity, no exposure to direct sunlight
• 24 Month / at room temperature
• 24 Month / below 25°C
• 24 Month / cool and dry storage area
• 24 Month / cool and dry storage area, no exposure to sunlight, 15°C to 25°C
• 24 Month / dry, at room temperature
• 24 Month / storage in a dry place protected from light
• 30 Month / keep containers tightly sealed in a dry, cool and well-ventilated place. Protect from frost, heat and sunlight. Do not use compressed gas to empty the containers. Store in original container, 15°C to 30°C
• 36 Month / at 20°C
• 36 Month / at max. 50°C, no exposure to sunlight, 10°C to 30°C
• 24 Month / at 15°C to 25°C
• 24 Month / at 5°C to 35°C

• Shore A hardness
• 10
• 23
• 24
• 26
• 28
• 30
• 40
• 45
• 50
• 55
• 25
• 20

• Short-term resistance against
• Aliphatic solvents<br>Fuels<br>Mineral oils<br>Vegetable fat<br>Vegetable oils<br>Animal fat<br>Animal oils
• Fuels<br>Mineral oils<br>Animal fat<br>Animal oils<br>Vegetable fat<br>Vegetable oils
• Fuels<br>Mineral oils<br>Animal oils<br>Vegetable oils<br>Oils
• Fuels<br>Mineral oils<br>Oils<br>Vegetable oils<br>Animal oils
• Fuels<br>Mineral oils<br>Vegetable oils<br>Animal oils<br>Oils
• Mineral oils<br>Fuels<br>Animal fat<br>Animal oils<br>Vegetable fat<br>Vegetable oils
• Mineral oils<br>Fuels<br>Vegetable oils<br>Animal oils<br>Oils
• Diluted acids<br>Diluted lye

• Silicone-free
• No
• Yes

• Skin formation time
• 15–20 min.

• Smell/fragrance
• Aminic
• Aromatic
• Ester-like
• Faint odour
• Fresh
• Fruity
• Gasoline
• Hydrocarbon
• Mild
• Neutral
• Odourless
• Oil
• Oily
• Peach
• Product-typical
• Spring
• Sweetish
• Vinegar
• Perfumed
• Alcohol
• Lemon
• Solvent-like
• Characteristic

• Specific Gravity
• 1500 ± k20 g/m³

• Spot weldable
• No
• Yes

• Storage stability
• 12 months on condition that the material is indoors, in a sealed drum and protected against heat and freeze

• Stretch capacity
• 2 %
• 3 %
• 8 %

• Substrates with good adhesion
• Brass<br>Steel
• Copper<br>Brass<br>Aluminium<br>Lead<br>Chrome<br>Stainless steel<br>Cast iron<br>Steel (bare and anodised)<br>Titanium<br>Zinc sheets
• Copper<br>Steel
• Ferrous metals<br>PMMA<br>Polycarbonate<br>Polystyrene<br>Galvanised surfaces
• Steel<br>Zinc plated steel
• Wood<br>Metal<br>Cardboard<br>PMMA<br>Polycarbonate<br>Polystyrene

• Temperature Resistance
• between –20°C do +75°C

• Thickness
• 0.052 mm
• 0.065 mm
• 0.07 mm
• 0.08 mm
• 0.13 mm
• 0.15 mm
• 0.18 mm
• 0.19 mm
• 0.22 mm
• 0.27 mm
• 0.3 mm
• 0.50 mm
• 0.8 mm
• 1 mm
• 1.35 mm
• 130 µm
• 6 mm

• Thickness
• 1.2 mm

• Ultraviolet resistance
• 3 weeks, outdoor weathering
• 6 months, outdoor weathering
• Limited
• No
• Yes, when installed to be resistant to driving rain
• Yes

• Version
• 360 ° valve
• Corrosion-resistant
• Fan nozzle
• Fein
• Flat
• For 300 ml bags
• For 600 ml bags
• High-quality
• Medium
• Round nozzle
• Simple
• Smooth
• Standard design
• With eyelet
• With hook
• With lamination
• With punching mechanism
• Granules/calcinated (baked)
• With permanently angled drain and handle
• With flexible drain pipe
• With handle
• With thread for flexible filler pipe

• Weight of content
• 0.4 kg
• 1 kg
• 1.02 kg
• 100 g
• 1000 g
• 1045 g
• 1050 g
• 107 g
• 1080 g
• 1090 g
• 1095 g
• 12 kg
• 163 g
• 1760 g
• 180 g
• 1960 g
• 20 g
• 207 g
• 25 g
• 250 g
• 251.6 g
• 254.1 g
• 255 g
• 288 g
• 3 g
• 304 g
• 313 g
• 316 g
• 32.7 kg
• 332 g
• 377 g
• 388 g
• 3975 g
• 4.5 kg
• 40 g
• 400 g
• 409 g
• 410 g
• 432 g
• 470 g
• 5 kg
• 5.1 kg
• 5.2 kg
• 5.35 kg
• 50 g
• 506 g
• 570 g
• 58 g
• 650 g
• 7.27 g
• 790 g
• 89.6 g
• 900 g
• 960 g
• 970 g
• 500 g
• 417 g
• 56 g
• 200 g

• Weight of machine
• 0.47 kg

• Width of band
• 50 mm

• Width x height x depth
• 360 x 275 x 120 mm

• Working pressure
• 400 bar

• Acoustic insulation for joints
• 58 dB

• Adhesive base
• Acrylate
• Modified natural rubber
• Natural rubber
• Natural rubber adhesive
• Natural rubber hotmelt
• Polyacrylate
• Rubber
• Rubber hotmelt
• Solvent acrylate
• Synthetic natural rubber

• Adhesive tape backing material
• Japanese rice paper
• Paper
• Special paper with two-part slide-bar of PES

• Barrier layer
• Paper
• PE film

• Chemical basis
• Alkaline tenside

• Chemical basis
• Mineral oil

• Chemical basis
• Paraffinic and naphthenic hydrocarbons

• Chemical basis
• Phosphate

• Colour
• Colourless

• Colour
• Leaf green RAL 6002

• Colour
• Red

• Colour
• Silver

• Colour
• Transparent, translucent, opaque

• Colour
• White

• Colour
• Yellow fluorescent

• Colour
• Yellow<br>White

• Container
• Aerosol can

• Container
• Aerosol can

• Container
• Cartridge

• Container
• Cartridge

• Contents
• 1000 ml

• Contents
• 1000 ml

• Contents
• 310 ml

• Contents
• 310 ml

• Contents
• 310 ml

• Contents
• 50 ml

• Contents
• 600 ml

• Lubricant system
• Grease

• Material of the hose
• Synthetic rubber

• Mesh size
• 125 µm
• 190 µm
• 260 µm

• Min. friction
• 0.1 µ

• Min./max. operating pressure
• 4-7 bar

• Number of pieces
• 4 PCS

• Oil basis
• Mineral oil

• Oil basis
• Synthetic

• Oil basis
• Synthetic

• Oil basis
• Synthetic / mineral oil combination

• Product weight (per item)
• 143.334 g

• Product weight (per item)
• 15740.000 g

• Sealing-tape thickness on delivery
• 4 mm

• Solid lubricant
• Polytetrafluoroethylene

• Viscosity/consistency
• Medium viscosity paste
• Pasty
• Liquid

• Weight of content
• 265 g

• Width
• 19 mm

• Available colours
• FC 0006

• Chemical basis
• Aliphatic hydrocarbon

• Chemical basis
• Bitumen

• Chemical basis
• Epoxy

• Chemical basis
• Naphtha

• Chemical basis
• Neutral crosslinked silicones, oxime-based

• Chemical basis
• Neutrally networked silicones, with alkoxy basis (alcohol basis)

• Chemical basis
• Nitroalkydale

• Chemical basis
• Sauer silicones (acetate systems)

• Chemical basis
• Silicone resin

• Colour
• Anthracite

• Colour
• Brilliant white

• Colour
• Light brown transparent

• Colour
• Opal green

• Colour
• Red

• Colour
• White

• Colour
• Yellowish

• Colour
• Yellowish

• Conditions for VOC concentration
• ChemVOCFarb

• Contents
• 500 ml

• Density
• 0.745 g/cm³

• Density
• 0.893 g/cm³

• Density
• 0.979 g/cm³

• Density
• 1.09 g/cm³

• Density/conditions
• 0.99 g/cm³ / at 20°C, 50% relative humidity

• DIN
• 18540
• 18545-2

• Fungicidal properties
• No
• Yes

• Heat conductance λ
• 0.034 W/(m*K)
• 0.2 J/(m*s*K)

• Length
• 10 m

• Max. flow rate
• 160 l/min

• Min. temperature conditions
• -10 °C

• Min./max. working pressure
• 6-12 bar
• 6-9 bar

• Range of applications
• Oil pumps<br>Front cover<br>Camshaft bearing cover<br>Oil pans<br>Transmission cover<br>Exhaust manifold<br>Exhaust flange<br>Cover and flange on engines<br>Intake area
• Water pumps<br>Oil pumps<br>Front cover<br>Camshaft bearing cover<br>Thermostat housing<br>Oil pans<br>Transmission cover<br>Intake area<br>Sealing of accumolators
• Water pumps<br>Oil pumps<br>Front cover<br>Camshaft bearing cover<br>Thermostat housing<br>Oil pans<br>Transmission cover<br>Sunroof<br>Doors

• Sealing-tape thickness
• 2 mm

• Smell/fragrance
• Characteristic

• Smell/fragrance
• Characteristic

• Smell/fragrance
• Fruity

• Smell/fragrance
• Peach

• Soap base
• AL complex
• Inorganic
• Lithium complex
• Lithium 12 hydroxystearate

• Volumetric capacity
• 1 l

• Weight of content
• 1.45 kg

• Weight of content
• 1.45 kg

• Acid-free
• Yes

• Chemical basis
• Mineral oil

• Colour
• Black

• Colour
• Grey

• Colour
• Grey brown, metallic

• Colour
• Luminous yellow

• Colour
• Sanitary grey

• Colour
• Transparent

• Colour
• Transparent

• Continuous motion absorption
• 25 %

• Density
• 1.38 g/cm³

• Density conditions
• at 20°C

• Density conditions
• at 20°C

• Fungicidal properties
• No

• Fungicidal properties
• Yes

• Gloss level
• High gloss

• Gloss level
• Silk gloss

• Heat conductance λ conditions
• at 0°C, in accordance with ISO 2581
• at 10°C, in accordance with ISO 2581
• in accordance with ASTM D-2214/70

• Lubricant code
• K2K-30
• KP2N-20
• KP2N-30
• KPF2K-30
• KPFHC2R-40
• KP2K-30

• Max. short-term temperature resistance
• 100 °C
• 120 °C
• 130 °C
• 150 °C
• 180
• 180 °C
• 190 °C
• 200 °C
• 250 °C
• 300 °C
• 370 °C
• 400 °C
• 500 °C
• 90 °C

• Max. temperature conditions
• 40 °C

• Max. temperature resistance
• 100 °C
• 1000 °C
• 110 °C
• 120 °C
• 130 °C
• 150 °C
• 160 °C
• 200 °C
• 240 °C
• 260 °C
• 300 °C
• 400 °C
• 50 °C
• 60 °C
• 650 °C
• 70 °C
• 80 °C
• 85 °C
• 90 °C

• Min. dust-drying time
• 15 min
• 5 min
• 8 min

• Min. initial strength
• 30 min

• Min. strand diameter
• 68 mm

• Min. temperature conditions
• 5 °C

• Min./max. application quantity in surface bonding
• 100-160 g/m²
• 200-300 g/m²

• Min./max. gelation time
• 7-12 min

• Min./max. joint width for watertightness in driving rain
• 10-15 mm
• 2-3 mm
• 3-5 mm
• 3-6 mm
• 4-7 mm
• 8-14 mm

• Min./max. processing temperature for can
• 10 to 30 °C
• -10 to 40 °C
• 10 to 50 °C

• Min./max. processing temperature for can
• -10 to 40 °C

• Min./max. viscosity
• 1800-2200 mPas
• 320-420 mPas
• 500-900 mPas
• 80-180 mPas
• 90000-130000 mPas

• Min./max. viscosity 1
• 100000-180000 mPas
• 4000-9000 mPas

• Min./max. viscosity 1
• 20.000-40.000 mPas

• Number of pieces
• 10 PCS
• 25 PCS

• pH value
• 8.0-9.0

• Product weight (per item)
• 1630 g

• Product weight (per item)
• 72 g

• Roll width
• 12 mm
• 19 mm
• 25 mm
• 50 mm

• Smell/fragrance
• Characteristic

• Smell/fragrance
• Characteristic

• Smell/fragrance
• Characteristic

• Smell/fragrance
• Citrus

• Smell/fragrance
• Mild

• Smell/fragrance
• Odourless

• Suitable for max. thread
• M12

• Type of adhesive
• Hot melt pressure sensitive adhesive

• Adhesive force at 25 mm
• 19 N
• 23 N
• 38 N

• Application quantity conditions
• bilateral application

• Chemical basis
• 2-propanol

• Chemical basis
• Mix of organic solvents

• Colour
• Anthracite

• Colour
• Black

• Colour
• Colourless

• Colour
• Jet black, similar to RAL 9005

• Conditions for viscosity 1
• at 25°C, Brookfield RVT, spindle 3/2.5 rpm
• at 25°C, Brookfield RVT, spindle 6/2.5 rpm

• Continuous motion absorption
• 25 %

• Density
• 0.773 g/cm³

• Density
• 0.78 g/cm³

• Density
• 0.78 g/cm³

• Density
• 0.834 g/ml

• Density/conditions
• 0.893 g/cm³ / at 20°C

• Design
• With ring eyelet

• Drying time
• 10 min
• 120 h
• 15 min
• 16 h
• 2.5 h
• 20 min
• 25 min
• 50 min

• Foil thickness
• 0.1 mm

• Hardener content
• 33 %

• Internal diameter
• 5 mm

• Kinematic oil basis viscosity
• 23

• Kinematic oil basis viscosity
• 85 cSt

• Max. change in volume
• 10 %
• 2 %
• 25 %
• -5 %

• Max. dust-drying time
• 10 min

• Max. flow rate
• 254 l/min

• Max. gap-filling ability
• 0.35 mm

• Max. processing temperature
• 25 °C

• Max. processing temperature
• 25 °C

• Max. strand diameter
• 85 mm

• Max. temperature conditions
• 60 °C

• Max. temperature resistance
• 650 °C

• Max. temperature resistance
• 80 °C

• Min. flash-off time
• 1 h
• 10 min
• 15 min
• 5 min
• 30 min

• Min. skin-formation time /conditions
• 20 / at 23°C and 50% relative humidity
• 25 / in accordance with DIN 50014

• Min./max. curing time
• 6-8 h
• 4-24 h

• Min./max. final strength
• 12 h-24 h

• Min./max. hardening time /conditions
• 10-60 s / Depending on the material
• 20-100 s / Depending on the material
• 5-6 min / depending on the adhesive gap
• 5-90 s / Depending on the material

• Min./max. processing temperature
• 5 to 40 °C

• Min./max. skin-formation time
• 20-25 min
• 5-7 min
• 8-12 min
• 90-120 min
• 3-8 min

• Min./max. temperature conditions
• -30 to 130 °C

• Min./max. tensile strength
• 12-25 N/mm²
• 2-15 N/mm²
• 4-7 N/mm²

• Moulded density
• 29 kg/m³
• 45 kg/m³
• 30 kg/m³

• Performance (points system)
• 2 of 5 points
• 3 of 5 points
• 5 of 5 points

• pH-neutral
• No

• Resin-free
• Yes

• Scale
• Up to 1100 ml
• Up to 1900 ml
• Up to 300 ml
• Up to 550 ml

• Shelf life from production
• 24 Month

• Shelf life from production
• 5 Years

• Vapour pressure
• 1.33 Pa

• Viscosity
• 10000 mPas
• 10500 mPas
• 11000 mPas
• 1500 mPas
• 19000 mPas
• 3.24 Pas
• 3000 mPas
• 3500 mPas
• 4000 mPas
• 55000 mPas

• Viscosity/consistency
• Gel

• Backing material
• Aluminium composite foil
• Aluminium foil
• Coated polyester fibre
• PE-coated fabric
• Plastic-coated rayon fabric
• Polyester
• Polyethylene foam
• Polyisobutylene
• PP foil
• PVC
• Rayon fabric
• Silicone
• Special paper
• Woven polyester fleece

• Boiling point
• -35 °C

• Can be further processed after min.
• 20 min

• Can be varnished after
• 2 h

• Can be varnished after
• 2 h

• Cell structure
• Medium - fine

• Colour after curing
• Transparent

• Conditions for final strength
• at 23°C
• at 23°C and 55% relative humidity

• Conditions for moulded density
• foamed into joints, tested in accordance with Würth test methods
• in accordance with DIN EN ISO 845 (average)
• in accordance with DIN 53420

• Conditions for through drying
• at 23°C, 50% relative humidity

• Conditions for vapour pressure
• at 20°C

• Conditions for viscosity of oil basis
• at 40°C

• Conditions for viscosity of oil basis
• at 40°C, in accordance with ASTM D-445

• Curing time
• 4 h
• 80 min
• 90 min

• Density
• 0.75 g/cm³

• Density
• 0.77 g/cm³

• Density
• 0.77 g/cm³

• Density
• 0.89 g/cm³

• Density
• 0.895 g/cm³

• Density
• 1.37 g/cm³

• Density conditions
• at 20°C

• Density conditions
• at 20°C, DIN 51757

• Grain size
• 200 µm

• Granulate grid
• 18/50 mesh

• Hardener content
• 2 %

• Max. flash-off time
• 24 h

• Max. gluing gap size
• 0.1 mm
• 0.15 mm
• 0.25 mm
• 6 mm

• Max. pressure
• 4 bar
• 690 bar
• 8 bar

• Max. processing time
• 3 min

• Min. flashing point
• 65 °C

• Min. processing time
• 2 min
• 4 min

• Min. resistance against driving rain (pressure)/conditions
• 300 Pa / in accordance with DIN 18542-BG2
• 600 Pa / in accordance with DIN 18542-BG1

• Min. skin-formation time
• 15 min

• Min. skin-formation time
• 20 min

• Min. temperature conditions
• -15 °C

• Min. temperature conditions
• -25 °C

• Min. temperature conditions
• 5 °C

• Min. wet skin-formation time/conditions
• 2 min/ at 20°C and 50% relative humidity

• Min./max. initial strength
• 5-15 min

• Min./max. pressing pressure
• 0.1-0.8 N/mm²
• 7-8 N/mm²

• Min./max. processing temperature
• 5 to 30 °C

• Min./max. temperature resistance
• -40 to 90 °C

• Min./max. tensile strength /conditions
• 12-25 N/mm² / in accordance with DIN 53288
• 2-15 N/mm² / in accordance with DIN 53288
• 8-10 N/mm² / in accordance with ASTM D-2095

• Min./max. viscosity 2
• 1500-3000 mPas
• 30000-40000 mPas

• Min./max. working life
• 5-7 min

• Number per pallet
• 576 PCS

• Period of use after opening
• 12 Month

• pH value
• 9.4

• pH value
• 9.5

• pH value/conditions
• 10 / undiluted
• 13 / at 20°C
• 5.5 / at 20°C
• 7.5 / undiluted
• 9.4 / in concentrate

• Resistance against
• Oil<br>Fuel

• Shelf life from production
• 24 Month

• Shore A hardness
• 18

• Silicone-free
• No

• Smell/fragrance
• Characteristic

• Thickness of adhesive tape
• 0.11 mm
• 0.32 mm

• Width
• 10 mm
• 100 mm
• 12 mm
• 15 mm
• 178 mm
• 19 mm
• 20 mm
• 24 mm
• 25 mm
• 25.4 mm
• 30 mm
• 38 mm
• 4 mm
• 42 mm
• 48 mm
• 50 mm
• 75 mm

• Acetone-free
• No
• Yes

• Acid-free
• Yes

• Adhesive force on steel (per unit of length)
• 1.9 N/cm

• Boron-free
• Yes

• Building material class/conditions
• B1 / in accordance with DIN 4102
• B2 - Normally inflammable / in accordance with DIN 4102
• B2 / in accordance with DIN 4102

• Cell structure conditions
• tested in accordance with Würth test methods

• Chemical basis
• Dimethyl ether

• Compression force deflection
• 98 kPa
• 40 N/mm²

• Conditions for gelation time
• at room temperature

• Conditions for pH value
• at 20°C

• Conditions for thorough drying
• At 20°C, 400 μ wet

• Conditions for viscosity 2
• at 25°C, Brookfield RVT, spindle 3/2.0 rpm
• at 25°C, Brookfield RVT, spindle 6/2.0 rpm

• Continuous motion absorption
• 10 %
• 12.5 %
• 20 %
• 25 %
• 5 %

• Continuous motion absorption
• 10 %

• Continuous motion absorption
• 25 %

• Curing time/conditions
• 24 h/ at 20°C

• Density
• 0.76 g/cm³

• Density
• 1.04 g/cm³

• Density conditions
• at 20°C

• Density conditions
• at 20°C

• Density/conditions
• 0.79 g/cm³ / at 20°C

• Density/conditions
• 0.895 g/cm³ / at 20°C

• Density/conditions
• 0.9 g/cm³ / at 20°C

• Density/conditions
• 1.45 g/cm³ / at 20°C

• Drying time/conditions
• 2 h / at 20°C

• Dust-drying time
• 10 min

• Flash-off time conditions
• at 20°C
• at 23°C and 50% relative humidity
• at 23°C and 50% relative humidity, as a primer, corrosion protection, activator

• Flow capacity
• 7.2 l/min

• Full curing speed/conditions
• 0.5 m/min / 23°C and 50% relative humidity
• 0.5 mm/min / 23°C and 50% relative humidity, moisture curing
• 1 mm/d / Depending on the strength of caterpillars
• 3 mm/d / 23°C and 50% relative humidity
• 3 mm/d / 23°C and 50% relative humidity, moisture curing
• 3 mm/d / 23°C and 55% relative humidity
• 3.5 mm/d / 23°C and 50% relative humidity
• 4 mm/d / 20°C and 50% relative humidity
• 4 mm/d / 23°C and 50% relative humidity
• 2 mm/d / 23°C and 50% relative humidity

• Hazard class (German Ordinance on Combustible Liquids)
• AI

• Kinematic oil basis viscosity
• 12 mm²/s
• 1500 cSt
• 16 mm²/s
• 16.5 mm²/s
• 25 mm²/s
• 27 cSt
• 280 cSt
• 29.5 cSt
• 30 cSt
• 612 cSt
• 7 mm²/s

• Max. temperature conditions
• 130 °C

• Max. temperature conditions
• 150 °C

• Max. temperature conditions
• 60 °C

• Max. thorough drying
• 3 d

• Min. coating thickness
• 1 µm

• Min. dripping point
• 140 °C
• 180 °C
• 74 °C

• Min. dry skin-formation time/conditions
• 5 min / at 20°C and 50% relative humidity

• Min. flashing point
• 100 °C

• Min. flashing point
• 21 °C

• Min. flashing point of active ingredient
• 200 °C
• 300 °C

• Min. initial strength
• 15 min
• 4 min

• Min. open time
• 3.5 min

• Min. pressing pressure
• 0.1 N/mm²

• Min. processing temperature for can
• 10 °C
• -10 °C
• 20 °C

• Min. processing temperature for can
• -10 °C

• Min. proportion of solids
• 33 %
• 50 %
• 66 %
• 80 %
• 98 %
• 53 %

• Min. skin-formation time
• 30 min

• Min. temperature conditions
• -25 °C

• Min. temperature conditions
• -40 °C

• Min. temperature resistance
• -10 °C
• -15 °C
• -20 °C
• -25 °C
• -30 °C
• -40 °C
• -50 °C
• -60 °C

• Min./max. final strength
• 12 h-24 h

• Min./max. processing temperature
• 5 to 40 °C

• Min./max. temperature resistance
• -40 to 145 °C

• NLGI grade/conditions
• 2 / with DIN 51818

• pH value / conditions
• 1 / at 20°C
• 4.8 / undiluted
• 9 / at 20°C

• Shore hardness A/conditions
• 38 / in accordance with DIN 53505
• 40 / in accordance with DIN 53505
• 40 / nach DIN 53505

• Softening point
• 66 °C

• Tack-free after
• 1.5 min
• 10 min
• 20 min
• 6 h

• Ultraviolet resistance
• Yes

• VOC concentration (CH)
• 0 %

• Compression force deflection conditions
• in accordance with ISO 844, 50% deformation
• in accordance with DIN 53577, 40% longitudinal compression

• Conditions for drying time
• at 20°C

• Conditions for open time
• at 20°C
• at 23°C
• at 20°C and 150 g/m²

• Conditions for softening point
• in accordance with ISO 2207

• Continuous motion absorption
• 25 %

• Density
• 1.01 g/cm³

• Dust-drying time
• 10 min

• Full curing speed
• 1 mm/d

• Full load capacity/conditions
• 24 h / with 2.5-mm seam

• Kinematic oil basis viscosity
• 17 mm²/s

• Long-term elasticity
• Virtually no elasticity

• Max. coating thickness
• 120 µm
• 2 µm

• Max. gap-filling ability
• 0.15 mm
• 0.25 mm
• 0.50 mm

• Max. open time
• 45 min

• Max. temperature conditions
• 170 °C

• Max. temperature conditions
• 180 °C

• Max. water-vapour diffusion resistance factor value µ
• 100

• Max. working life
• 25 min

• Max. working pressure
• 10 bar
• 800 bar

• Min. dripping point/conditions
• 250 °C / in accordance with DIN ISO 2176
• 260 °C / in accordance with DIN ISO 2176
• 180 °C / in accordance with DIN ISO 2176

• Min. flashing point
• 200 °C

• Min. flashing point
• 282 °C

• Min. flashing point
• -60 °C

• Min. flashing point of active ingredient
• 0 °C

• Min. functional strength
• 20 min

• Min. thorough drying
• 2 d

• Min./max. functional strength
• 3-6 h

• Min./max. open time
• 15-40 s
• 16-60 s
• 20-60 s
• 5-10 min

• Min./max. processing temperature
• 0 to 30 °C
• 0 to 40 °C
• 10 to 20 °C
• 10 to 30 °C
• 10 to 35 °C
• 10 to 40 °C
• 15 to 25 °C
• 15 to 30 °C
• 160 to 190 °C
• 18 to 35 °C
• 18 to 38 °C
• 180 to 200 °C
• 180 to 210 °C
• 180 to 220 °C
• 190 to 210 °C
• -25 to 40 °C
• 5 to 20 °C
• 5 to 25 °C
• 5 to 30 °C
• 5 to 35 °C
• -5 to 35 °C
• 5 to 40 °C
• 5 to 45 °C
• 5 to 80 °C
• 7 to 30 °C
• 7 to 35 °C

• Min./max. sealing thickness
• 2-4 mm

• Min./max. spraying distance
• 20-25 cm

• Min./max. surface processing temperature
• 10 to 30 °C
• 5 to 40 °C

• Min./max. temperature resistance
• -20 to 120 °C

• Min./max. temperature resistance
• -40 to 100 °C

• Resin-free
• Yes

• Shelf life from production
• 12 Month

• Shelf life from production
• 24 Month

• Shelf life from production
• 36 Month

• Shelf life from production/conditions
• 24 Month / at room temperature

• Shelf life from production/conditions
• 24 Month / frost-free storage area

• Shore A hardness
• 28

• Silicone-free
• Yes

• Silicone-free
• Yes

• Straßen-Rutsch-Test (German road slip test)
• 8 %
• 0 %

• Surface tension
• 0.02 N/m
• 22 mN/m

• Type of spray head
• 2-way spray head

• Type of spray head
• Cobra spray head
• Standard spray head

• Water-soluble
• Not readily soluble in water
• Yes
• No

• Wax-free
• Yes

• Working life
• 1 min
• 210 s
• 30 s
• 60 min
• 5 min

• Acid-free
• Yes

• Adhesive force at 10 mm
• 1.92 N

• AOX-free
• Yes

• AOX-free
• Yes

• Bio-degradable
• Yes

• Bio-degradable/conditions
• Yes / OECD conditions

• Boiling point
• 100 °C
• -44 °C

• Chlorine-free
• Yes

• Conditions for functional strength
• with tension-free materials

• Conditions for viscosity of oil basis
• at 20°C

• Conditions for viscosity of oil basis
• at 40°C

• Conditions for working life
• at 20°C
• at 23°C
• at 20°C, 20 g total mass

• Corrosion protection period
• 6 Month

• Curing time conditions
• depending on layer thickness

• Density
• 1.25 g/cm³

• Density conditions
• at 20°C

• Density/conditions
• 1.45 g/cm³ / at 20°C

• Drive-away time conditions
• at 23°C and 50% relative humidity

• Dynamic peel strength at 25 mm
• 7 N
• 8 N
• 8.5 N
• 9.8 N

• Full curing speed/conditions
• 3 mm/d / 23°C and 50% relative humidity

• Fully hardening/curing conditions
• 23°C and 50% relative humidity

• Kinematic oil basis viscosity
• 2000 cSt

• Loose weight
• 250 g/l
• 495 kg/m³

• Max. processing temperature for can
• 40 °C

• Max. skin-formation time
• 12 min

• Max. temperature resistance
• 1000 °C

• Max. working life
• 4 min
• 5 min

• Min. adhesive force at 25 mm
• 13 N
• 15 N

• Min. film forming temperature
• 5 °C
• 6 °C
• 7 °C

• Min. final strength
• 12 h
• 28 d
• 3 h
• 48 h

• Min. pressure
• 2 bar
• 7 bar

• Min. spraying distance
• 20 cm

• Min. surface processing temperature
• 10 °C
• 5 °C

• Min. transverse tensile strength
• 0.220 N/mm²

• Min. working life
• 3 min

• Min./max. breakaway torque
• 10-20 Nm
• 17-22 Nm
• 2-3 Nm
• 4-8 Nm

• Min./max. breakaway torque
• 25-35 Nm

• Min./max. flash-off time
• 5 min-15 min

• Min./max. friction
• 0.1-0.13 µ

• Min./max. spraying distance
• 10-15 cm

• Min./max. viscosity /conditions
• 100-150 mPas / at 25°C, Brookfield RVT, spindle 4/20 rpm
• 14000-20000 mPas / at 25°C, Brookfield RVT, spindle 5/2.5 rpm

• Min./max. worked penetration /conditions
• 285-285 / in accordance with DIN ISO 2137
• 265-295 / in accordance with DIN ISO 2137

• Mineral oil-free
• Yes

• Outer diameter
• 160 mm
• 195 mm
• 235 mm
• 7 mm

• Sealing thickness conditions
• based on DIN 53370, closing pressure 0.1-0.18 N/cm²

• Shelf life from production
• 24 Month

• Shelf life from production
• 24 Month

• Shelf life from production/conditions
• 12 Month / in closed original packaging at + 5°C to + 25°C and dry storage

• Shrinkage
• Minimal

• Silicone-free
• Yes

• Silicone-free
• Yes

• Smell/fragrance
• Characteristic

• Soap-free
• Yes

• Solvent-free
• Yes

• Ultraviolet resistance
• Yes

• Weight of content
• 324.4 g

• Worked penetration
• 265 to 295

• Acid-free
• Yes

• Acid-free
• Yes

• AOX-free
• Yes

• AOX-free
• Yes

• AOX-free
• Yes

• AOX-free
• Yes

• Behaviour in the presence of water
• 0-90
• 1-90

• Bio-degradable
• Yes

• Breakaway torque conditions
• M10 mm

• Breaking elongation conditions
• in accordance with DIN 53571
• for 2-mm film

• Chloric
• No

• Chloric
• No

• Conditions for being tack-free
• tested in accordance with Würth test methods

• Conditions for skin-formation time
• at 20°C
• at 23°C and 50% relative humidity

• Conditions for viscosity of oil basis
• at 40°C, in accordance with DIN 51562

• Conditions for working life
• at 23°C

• Conditions to maintain shelf life from production
• in closed original packaging at + 5°C to + 25°C and dry storage

• Corrosion protection period/category
• No rust spots after 7 cycles
• Corrosion category 0

• Design
• Fan nozzle
• Round nozzle

• Elongation at break
• 10 %
• 11 %
• 12 %
• 120 %
• 140 %
• 150 %
• 2.7 %
• 20 %
• 250 %
• 300 %
• 300 ± 100%
• 4 %
• 5 %
• 500 %
• 600 %

• Flashing point conditions
• in accordance with DIN ISO 3016

• Fungicidal properties
• No

• Max. open time /conditions
• 20 min / at 23°C and 50% humidity

• Max. spraying distance
• 25 cm

• Max. spraying distance
• 25 cm
• 30 cm

• Max. surface processing temperature
• 40 °C

• Max. temperature resistance
• 300 °C

• Min. breaking elongation
• 125 %
• 15 %
• 150 %
• 250 %
• 300 %
• 335 %
• 350 %
• 450 %
• 50 %
• 500 %

• Min. flashing point of active ingredient
• 200 °C

• Min. skin-formation time
• 20 min

• Min. spraying distance
• 10 cm

• Min. temperature conditions
• -30 °C

• Min. working life
• 3 min
• 4 min

• Min./max. full curing speed /conditions
• 3-3 mm/d / 23°C and 50% relative humidity
• 2-3 mm/d / 23°C and 50% relative humidity

• Min./max. initial strength
• 10-20 min
• 15-30 min
• 30-40 min
• 5-10 min
• 5-15 min

• Min./max. open time /conditions
• 8-10 min / at 20°C and 150 g/m²

• Min./max. processing temperature
• 5 to 35 °C

• Min./max. skin-formation time /conditions
• 15-40 min / at 23°C and 50% relative humidity
• 30-40 min / at 23°C and 50% relative humidity
• 45-60 min / at 23°C and 50% relative humidity

• Min./max. skin-formation time /conditions
• 15-40 min min / at 23°C and 50% relative humidity

• Min./max. temperature resistance
• -20 to 120 °C

• Oil absorber type
• Oil absorber type I<br>Oil absorber type II<br>Oil absorber type III
• Oil absorber type III/R

• Processing temperature
• 23 °C

• Recoatable/Can be painted over
• Yes

• Shelf life from production/conditions
• 24 Month / cool and dry storage area, in sealed original container

• Silicone-free
• Yes

• Silicone-free
• Yes

• Smell/fragrance
• Characteristic

• Stress group
• D4

• Tensile strength
• 0,2 ± 0,02 MPa
• 6 MPa

• Total thickness
• 0.5 mm
• 1.5 mm
• 3 mm
• 5 mm
• 6 mm

• AOX-free
• Yes

• Can be cut after
• 15 min
• 8 min

• Can be varnished after
• 1 h
• 15 min
• 12 h
• 0.5 h

• Chloric
• No

• Conditions for behaviour in the presence of water
• in accordance with DIN 51807-1

• Conditions for drying time
• at 23°C

• Conditions for Shore hardness
• in accordance with DIN 53505

• Conditions for skin-formation time
• at 23°C and 50% relative humidity

• Full curing speed
• 2.5 mm/d

• Full curing speed/conditions
• 2 mm/d / 23°C and 50% relative humidity

• Full curing speed/conditions
• 2 mm/d / 23°C and 50% relative humidity

• Grip strength
• 17 min
• 50 min
• 6 h

• Max. final strength
• 24 h
• 72 h

• Max. spraying distance
• 15 cm

• Max. temperature conditions
• 130 °C

• Max. usage duration
• 3 Weeks

• Min. diagonal breaking elongation
• 115 %

• Min. flashing point
• 200 °C

• Min. skin-formation time
• 30 min

• Min. yield (area)
• 0.5 m²
• 1 m²

• Min./max prevail torque
• 10-15 Nm
• 1-2 Nm
• 1-3 Nm
• 13-17 Nm

• Min./max. final strength
• 12 h-24 h
• 1-3 h
• 3-6 h
• 5-10 h
• 6-24 h

• Min./max. spraying distance
• 15-20 cm
• 15-25 cm
• 20-25 cm
• 20-30 cm

• Resin-free
• No
• Yes

• Resin-free
• Yes

• Resin-free
• Yes

• Resin-free
• Yes

• Shelf life from production
• 24 Month

• Shelf life from production/conditions
• 12 Month / in closed original packaging at + 5°C to + 25°C and dry storage

• Silicone-free
• Yes

• Silicone-free
• Yes

• Smell/fragrance
• Characteristic

• Suitable for
• 310 ml cartridge
• Thread diameter max. M80<br>Thread diameter max. R 3 inch
• Thread diameter max. R 3 inch (M80)
• Thread diameter max. R 3/4 inch

• Tack-free after
• 20 min

• Unleaded
• Yes

• Viscosity conditions
• at 180°C
• at 20°C
• at 25°C, Brookfield RVT, spindle 2/20 rpm
• at 25°C, Brookfield RVT, spindle 5/2.5 rpm
• at 23°C
• Brookfield

• VKA welding load
• 1800 N
• 2200 N
• 2400 N
• 2800 N
• 3000 N
• 4000 N
• 2600 N

• Acid-free
• Yes

• Acid-free
• Yes

• AOX-free
• Yes

• AOX-free
• Yes

• Bio-degradable
• Yes

• Bitumen-free
• Yes

• Conditions for ability to cut
• tested in accordance with Würth test methods

• Conditions for dust-drying time
• at 20°C

• Conditions for prevail torque
• M10

• Conditions for skin-formation time
• at 23°C and 50% relative humidity

• Conditions to maintain shelf life from production
• in closed original packaging at + 5°C to + 25°C and dry storage

• Contents
• 500 ml

• Drying time/conditions
• 1.5 h / at 20°C and 65% relative humidity
• 5 h / at 20°C and 65% relative humidity

• Friction force
• 450 N

• Kinematic oil basis viscosity
• 31 mm²/s

• Max. functional strength
• 4 min

• Max. processing temperature
• 25 °C
• -25 °C
• 260 °C
• 30 °C
• 35 °C
• 40 °C
• 50 °C
• 80 °C

• Min. combined tension and shear resistance
• 1 N/mm²
• 1.4 N/mm²
• 1.5 N/mm²
• 1.7 N/mm²
• 14 N/mm²
• 2.2 N/mm²
• 2.3 N/mm²
• 20 MPa
• 26.5 N/mm²
• 3 N/mm²
• 5 N/cm²
• 5 N/mm²
• 7 N/cm²
• 8 N/mm²
• 14.5 N/mm²
• 20 N/mm²

• Min. drying time
• 20 min

• Min. room temperature, material temperature and glue temperature
• 18 °C

• Min. spraying distance
• 20 cm
• 30 cm

• Min./max. full curing speed /conditions
• 3-3 mm/d / 23°C and 50% relative humidity

• Min./max. functional strength
• 0.5-1 h
• 1-3 h
• 2-3 h
• 2-4 min
• 30-40 min
• 3-6 h

• Mineral oil-free
• Yes

• Moisture resistance
• Conditionally
• No
• Yes

• Nominal diameter
• 80 mm

• Processing time
• 3 min

• Shelf life from production
• 12 Month

• Shelf life from production
• 18 Month

• Shelf life from production
• 24 Month

• Shelf life from production
• 36 Month

• Shelf life from production/conditions
• 24 Month / cool and frost-free storage area, in sealed original container

• Silicone-free
• Yes

• Silicone-free
• Yes

• Silicone-free
• Yes

• Tensile shear strength
• 4 MPa

• Acid-free
• Yes

• Base oil viscosity, kinematic/conditions
• 110 mm²/s / at 40°C
• 200 mm²/s / at 40°C
• 210 mm²/s / at 40°C
• 350 mm²/s / at 40°C
• 280 mm²/s / at 40°C

• Base oil viscosity, kinematic/conditions
• 17 mm²/s / at 20°C

• Coefficient of thermal expansion
• 0.0002 1/K
• 0.0004 1/K

• Complex-free
• Yes

• Conditions for drying time
• at 20°C
• at 20°C and 50% relative humidity
• at 23°C and 50% relative humidity
• at 20°C and 65% relative humidity

• Conditions for tensile strength
• at 23°C, in accordance with ASTM D-638
• in accordance with ASTM D-412
• in accordance with DIN 53455
• in accordance with DIN 53504
• in accordance with ISO 1926
• in accordance with DIN 53571

• Conditions for viscosity of oil basis
• at 20°C

• Container
• Canister

• Contents
• 500 ml

• Continuous motion absorption (up to 150°C)
• 25 %

• Free of phosphoric acid
• No
• Yes

• Friction force conditions
• Friction cylinder/plate, 1000 µm, 50 Hz, 2 hours

• Full resilience
• 20 min
• 24 h

• Hexane-free
• Yes

• Loss of mass
• 30 %

• Max. drying time
• 30 min

• Max. elongation at break
• 5 %

• Max. friction
• 0.13 µ

• Max. yield (area)
• 0.75 m²
• 1.5 m²

• Min. breaking elongation
• 250 %

• Min. drying time
• 15 min
• 20 min
• 25 min

• Min. longitudinal resistance to tearing
• 120 N/cm
• 200 N/cm
• 30 N/cm
• 6 N/mm

• Min. press-setting time of glue
• 60 min

• Min. processing temperature for can
• 20 °C

• Min. temperature resistance
• -35 °C

• Min. tensile strength
• 0.325 N/mm²
• 1.8 N/mm²
• 12 N/mm²
• 12.5 N/mm²
• 2.2 N/mm²
• 2.6 N/mm²
• 200 kPa
• 25 N/mm²
• 3.8 N/mm²
• 30 N/mm²
• 6.4 N/mm²
• 8 N/cm²

• Min./max. compressive shearing strength
• 1-3 N/mm²
• 18-26 N/mm²
• 2-6 N/mm²
• 6-13 N/mm²

• Min./max. compressive shearing strength /conditions
• 12-15 N/mm² / in accordance with DIN 54452
• 12-20 N/mm² / in accordance with DIN 54452
• 5-10 N/mm² / in accordance with DIN 54452

• Min./max. full curing speed
• 1-3 mm/d

• Min./max. processing temperature
• 5 to 40 °C

• Min./max. processing temperature
• 5 to 40 °C

• Min./max. relative air humidity
• 60-70 %

• Min./max. room temperature, material temperature and glue temperature
• 15 to 20 °C

• Phosphate-free
• Yes

• Resin-free
• Yes

• Resistance against
• Water<br>Salt water<br>Weak lyes<br>Weak acids

• Shelf life from production
• 24 Month

• Shelf life from production
• 36 Month

• Solvent-free
• Yes

• AOX-free
• Yes

• Application quantity per running metre/conditions
• 8 g/m / for 20-mm wide bar

• Breaking elongation
• 850 %

• Can be sanded after
• 10 d

• Compressive shearing strength conditions
• in accordance with DIN 54452

• Conditions for full resilience
• tested in accordance with Würth test methods

• Conditions for press-setting time of glue
• at 20°C

• Conditions for resistance to tearing
• in accordance with DIN 53515

• Conditions to maintain shelf life from production
• at 15°C to 25°C and max. 60% relative humidity

• Continuous motion absorption (above 150°C)
• 18 %

• Fungicidal properties
• Yes

• Load according to four-ball test
• 3800 N

• Material compatibility
• Steel<br>Non-ferrous metals<br>Stainless steel<br>EPDM<br>FKM<br>NBR

• Max. drying time
• 20 min
• 30 min

• Max. temperature conditions
• 100 °C
• 1100 °C
• 120 °C
• 1200 °C
• 130 °C
• 140 °C
• 1400 °C
• 150 °C
• 180 °C
• 200 °C
• 260 °C
• 40 °C
• 50 °C
• 55 °C
• 60 °C
• 85 °C

• Max. temperature resistance
• 80 °C

• Max. volume change/conditions
• 2 % / in accordance with DIN 52451

• Min. compressive strength
• 70 N/mm²

• Min. processing temperature
• 15 °C

• Min. processing temperature for can
• 5 °C

• Min./max. temperature resistance
• -40 to 150 °C

• Min./max. temperature resistance
• -40 to 180 °C

• Product weight (per item)
• 195.400 kg

• Propellant
• Butane<br>Propane

• Resin-free
• Yes

• Resistance against
• Aging
• Aging<br>Weather
• Aging<br>Weather<br>Humidity
• Alcohol<br>Diluted acids and lyes<br>Water
• Alcohol<br>Petrol<br>Oil<br>Water
• Corrosion<br>Oxidation
• Fats<br>Household cleaning products<br>Oil<br>Flue gases and their condensates
• Mineral oils<br>Water
• Oil<br>Fuel
• Petrol<br>Diesel<br>Cooling liquid<br>Engine and gear oils
• Salt water<br>Freshwater<br>Aqueous surfactant solutions
• Salt water<br>Weak lyes<br>Weak acids<br>Splash
• Water
• Water<br>Alkaline water
• Water<br>Diluted acids and lyes<br>Salt water
• Water<br>Diluted inorganic acids and lyes<br>Aqueous cleaning agents
• Water<br>Lime water<br>Public sewage<br>Weak acids<br>Weak lyes<br>Salt water
• Water<br>Salt water<br>Acid<br>Lye
• Water<br>Salt water<br>Diluted acids and lyes
• Water<br>Weak lyes<br>Acid
• Water<br>Weather

• Shelf life from production
• 36 Month

• Silicone-free
• Yes

• Weight of content
• 21 kg

• Acid-free
• Yes

• AOX-free
• Yes

• Application conditions
• up to 90% relative humidity

• Behaviour in the presence of water/conditions
• 0-90 / in accordance with DIN 51807-1
• 1-90 / in accordance with DIN 51807-1

• Building material class
• E - Normally inflammable

• Coating compatibility
• Yes

• Colour number
• 1873
• 1900
• 1920
• 1930
• 3026
• 9005

• Conditions for drying time
• at 20°C

• Conditions for load according to four-ball test
• in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)

• Contents
• 400 ml

• Final spreading possible after
• 20 min

• Ignition temperature
• 200 °C
• 235 °C
• 250 °C
• 365 °C
• 425 °C

• Max. application quantity in surface bonding
• 220 g/m²
• 400 g/m²

• Max. temperature resistance of the hardened material
• 120 °C

• Min. breakaway torque
• 21 Nm
• 30 Nm

• Min. processing temperature
• 1 °C

• Min. wood moisture
• 8 %

• Min./max. processing temperature for can
• 5 to 30 °C

• Min./max. temperature resistance of the hardened material
• -30 to 100 °C
• -45 to 120 °C
• -60 to 120 °C

• Min./max. wood moisture
• 8-10 %
• 8-12 %
• 8-14 %

• NLGI grade
• 2

• Pour point
• -20 °C
• -25 °C

• Resistance against
• Salt water<br>Weak lyes<br>Weak acids<br>Splash

• Shore A hardness
• 24

• Sustainability
• Low-pollution

• Water-vapour diffusion resistance factor value µ
• 2700

• Weight of content
• 186.9 kg

• AOX-free
• Yes

• CFC (fuel gas) free
• Yes

• Conditions for final spreading
• at 20°C and 50% relative humidity, tested in accordance with Würth test methods

• Conditions to maintain shelf life from production
• at 15°C to 25°C and max. 60% relative humidity

• Corresponding automobile specifications
• Volvo Standard 1277.2

• Elongation at break/conditions
• 500 % / in accordance with DIN 53504

• Material compatibility
• O- and X-Ring<br>Plastic<br>Coated Surfaces

• Max. breaking elongation/conditions
• 500 % / in accordance with DIN 53504
• 550 % / in accordance with DIN 53504

• Max. permissible VOC concentration
• 0 %

• Max. processing temperature
• 30 °C

• Max. wood moisture
• 12 %

• Min. breaking elongation
• 300 %

• Min. prevail torque
• 10 Nm
• 45 Nm

• Min./max. wood moisture outdoors
• 11-15 %

• PVC-free
• Yes

• Recoatable/Can be painted over
• No

• Resin-free
• Yes

• Shelf life from production
• 18 Month

• Shelf life from production
• 24 Month

• Shelf life from production
• 24 Month

• White oil-free/mineral oil-free
• No

• Compression set
• 25 %

• Conditions for drying time
• at 20°C

• Contents
• 500 ml

• Density/conditions
• 1 g/cm³ / at 20°C

• Dripping point conditions
• in accordance with DIN 51801
• in accordance with DIN ISO 2176

• Kinematic oil basis viscosity
• 30 cSt

• Max. VOC concentration
• 0 %

• Min. flash-off time
• 5 min

• Min./max. application quantity in assembly bonding
• 120-180 g/m²

• Recoatable/Can be painted over
• No

• Resistance against
• Aging

• Shore A hardness
• 20

• Sustainability
• Low-emission/low-pollution

• Sustainability
• Low-emission/low-pollution

• VOC-free
• No
• Yes

• White oil-free/mineral oil-free
• No
• Yes

• Compression set conditions
• after 22 hrs, at 23°C, ISO 1853B

• Conditions for specific volume resistivity
• in accordance with ASTM D-257

• Conditions for viscosity of oil basis
• at 40°C

• Container
• Can

• Contents
• 400 ml

• Density
• 1 g/cm³

• Isocyanate-free
• Yes

• Max. permissible VOC concentration
• 250 g/l

• Min. breaking elongation
• 450 %

• Min. grip strength
• 45 min

• Min./max. ambient processing temperature
• 10 to 30 °C

• Min./max. shear strength
• 5-10 N/mm²

• Shelf life from production
• 18 Month

• Shelf life from production
• 36 Month

• Shelf life from production
• 36 Month

• Shore D hardness
• 70 +/- 5
• 80
• 87

• VOC concentration (CH)
• 376.1 g/l
• 459 g/l
• 463 g/l
• 53.89 %
• 540 g/l
• 588.66 g/l
• 622.7 g/l
• 632 g/l
• 669 g/l
• 69.52 %
• 692 g/l
• 728 g/l
• 742.8 g/l
• 76.57 g/l
• 83.5 %
• 89.56 %
• 93 %
• 95.53 %
• 98 %

• Wear depth
• 0.3 µm

• Breaking elongation conditions
• for 2-mm film

• Conditions for combined tension and shear resistance
• after four hours, 23°C, EN 1465
• in accordance with DIN 53283, 2-mm layer thickness
• in accordance with DIN 53427
• in accordance with EN 1465
• at 23°C

• Conditions for tensile shear strength
• in accordance with ASTM D-950

• Container
• Aerosol can

• Design
• Round nozzle

• Free from heavy metals
• Yes

• Max. pressing pressure
• 0.6 N/mm²
• 0.7 N/mm²

• Max. VOC concentration
• g/l
• 14 g/l
• 2 g/l
• 3 g/l
• 4 g/l

• Min. flash-off time
• 5 min

• Surface pre-treatment required
• Dry, dust and grease-free
• On absorbent or porous surfaces
• On porous surfaces

• Sustainability
• Pollutants / Emissions

• Water absorption (%)
• 1 Vol-%

• Water-vapour diffusion resistance factor value µ
• 749

• Weight of content
• 333.6 g

• Building material class
• B2 - Normally inflammable

• Coefficient of thermal expansion conditions
• in accordance with ASTM EB-31

• Container
• Aerosol can

• Free from heavy metals
• Yes

• Material compatibility
• Steel<br>Non-ferrous metals<br>Stainless steel<br>Epoxy glass fabric<br>EPDM<br>FKM<br>PE<br>PP<br>Vinyl<br>PTFE<br>PL<br>PA
• Steel<br>Non-ferrous metals<br>Stainless steel<br>Epoxy glass fabric<br>EPDM<br>FKM<br>PE<br>PP<br>Vinyl<br>PTFE<br>PL<br>PA<br>NBR
• Steel<br>Non-ferrous metals<br>Stainless steel<br>FKM

• Max. proportion of solids
• 2.3 %

• Ratio of ingredients
• 1:1
• 250 ml is sufficient for 25 l washing liquid
• 32 ml is sufficient for 2,5 - 3 l washing liquid
• Component A: Component B = 1:1
• Miscible in all proportions
• Mixing ratio of acrylic sealant to water = 1:1 to 1:5
• Mixing ratio of painters acrylic to water = 1:5 to 1:10

• Shelf life from production
• 24 Month

• Solvent-free
• Yes
• No

• Water absorption conditions
• after seven days

• Weight of content
• 270 g

• Worked penetration conditions
• in accordance with DIN ISO 2137

• Additional articles
• Acetone cleaner, art. 0893460; Quattro rust stop, art. 08932141; pneumatic axial grinder, art. 07032310; Flexi-Disc, art. 0578705 …; nylon fleece disc, art. 067322 50/75; mini fleece disc, art. 0673205.../207...; locking pliers, art. 071409...
• Cartridge gun, art. prefix no. 0891...
• Sandpaper Useit, art. no. 058130..., 058131..., 0581330...
• Sandpaper Useit, art. no.: 05813...

• CFC (fuel gas) free
• Yes

• Conditions to maintain shelf life from production
• at 20°C

• Corrosion protection period conditions
• in accordance with DIN 51802
• in accordance with DIN 51802, SKF Emcor test

• Design
• Round nozzle

• DIN
• 18545-2

• Paint-wetting impairment substances
• No
• Yes

• Water-vapour permeability
• 0.72 g/m²/d

• Coating compatibility
• Yes

• Conditions for VKA welding load
• in accordance with DIN 51350-4, VKA test (Institute for Internal Combustion Engines)

• Conditions for water-vapour permeability
• in accordance with ISO 1663, specimen thickness 5 mm

• Dielectric strength conditions
• in accordance with ASTM D-149

• Free from heavy metals
• Yes

• Glass transition temperature/conditions
• -45 °C / in accordance with DIN 53445

• Water-vapour diffusion resistance factor value µ
• 749

• CFC (fuel gas) free
• Yes

• Compression strength
• 4 N/cm²

• Max. processing temperature for can
• 40 °C

• Number per pallet
• 576 PCS

• Relative permittivity
• 2.8

• Compression strength conditions
• in accordance with DIN 53421, at 10% compression

• Conditions for relative permittivity
• 1 MHz, ASTM D-150

• Min. processing temperature
• -10 °C
• 15 °C
• -15 °C
• 20 °C
• -50 °C
• 10 °C
• 5 °C

• Sustainability
• Pollutants / Emissions

• Conditions for NLGI grade
• with DIN 51818

• Loss factor
• 0.002

• Loss factor conditions
• 1 MHz, ASTM D-150

• Specific volume resistivity
• 1000000000000000 Ohm/cm

• Length of roll
• 10 m
• 12.5 m
• 20 m
• 25 m
• 30 m
• 4.3 m
• 6.5 m
• 8 m
• 12 m

• Elongation at break conditions
• in accordance with DIN 53455

• Yield (volume) approx.
• 5.5 l

• Conditions for yield
• Tested in accordance with Würth test methods