Close
Filters
Search

Diesel particulate filter cleaner

Article No. 5861014500
Diesel particulate filter cleaner CLNR-PARTCLFILT-400ML
€19.47 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Cleaner for removing carbon and ash deposits from diesel particulate filters

Loosens and removes carbon deposits from the particulate filter

DPF can be cleaned without needing to remove it

aves money as it may eliminate the need to fit a new particulate filter (depending on the condition of the particulate filter)

Non-flammable

Neutral, ash-free and metal-free recipe

Evaporation without residue

Notice

This information is intended to advise you, to the best of our knowledge, based on our tests and experience. Preliminary testing required! For more information, please refer to the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Cleaner for removing carbon and ash deposits from diesel particulate filters

Loosens and removes carbon deposits from the particulate filter

DPF can be cleaned without needing to remove it

aves money as it may eliminate the need to fit a new particulate filter (depending on the condition of the particulate filter)

Non-flammable

Neutral, ash-free and metal-free recipe

Evaporation without residue

Notice

This information is intended to advise you, to the best of our knowledge, based on our tests and experience. Preliminary testing required! For more information, please refer to the technical data sheet.

The usage instructions are recommendations based on the tests we have conducted and based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area
  • Remove the temperature or pressure sensor

  • Insert the probe into the hole created and spray in the direction of the particulate filter to empty

  • Recovery then needs to be initiated manually via the tester or by taking a test drive

  • Interrogate the fault memory following recovery and delete any errors if necessary. One can is sufficient for one particulate filter
Instructions

The diesel particulate filter cleaner is used to rectify performance losses or faults that are exacerbated by dirty diesel particulate filters. The full absorption capacity is restored by cleaning the filter.

Products specifications
Contents 400 ml
Colour Rosy
Smell/fragrance Aminic
Chemical basis Water tenside
Shelf life from production 15 Month
Density 1.01 g/cm³
Density conditions at 20°C
pH value 11.47

Würth Catalogue(2)

Catalogue page as PDF 1 |  2 |  3 |  4

Flip catalog

Datasheets(1)

Safety data sheet 1

Products specifications
Contents 400 ml
Colour Rosy
Smell/fragrance Aminic
Chemical basis Water tenside
Shelf life from production 15 Month
Density 1.01 g/cm³
Density conditions at 20°C
pH value 11.47
Related Product
Close