Close
Filters
Search

Exhaust assembly paste

Article No. 0890100045
Exhaust assembly paste EXHSTREPCOMPD-ASSEMBLYPASTE-TUBE-140G
€4.60 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Soft compound for quick, easy and completely gas-tight assembly of sleeve (pipe plug) and flange connectors in exhaust systems.
  • No complicated welding required
  • Becomes as hard as metal due to the heat from the exhaust
  • Temperature resistant up to approx. 800°C
  • Seals off permanently
  • Resistant to impacts and vibration
  • Not susceptible to rust — hence easy to dismantle

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Soft compound for quick, easy and completely gas-tight assembly of sleeve (pipe plug) and flange connectors in exhaust systems.
  • No complicated welding required
  • Becomes as hard as metal due to the heat from the exhaust
  • Temperature resistant up to approx. 800°C
  • Seals off permanently
  • Resistant to impacts and vibration
  • Not susceptible to rust — hence easy to dismantle

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Ideally suited for installing or replacing exhaust components and for sealing connection points.

Instructions

Before use, remove loose rust and grease. Then apply the assembly paste to the plug connections, assemble the exhaust components and secure.

Products specifications
Weight of content 140 g
Colour Grey
Smell/fragrance Odourless
Chemical basis Sodium silicate
Shelf life from production 12 Month
Max. temperature resistance 800 °C
Density 1.71 g/cm³
Density conditions at 20°C

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet

Products specifications
Weight of content 140 g
Colour Grey
Smell/fragrance Odourless
Chemical basis Sodium silicate
Shelf life from production 12 Month
Max. temperature resistance 800 °C
Density 1.71 g/cm³
Density conditions at 20°C
Close