Close
Filters
Search

Profile rubber adhesive

Article No. 0890100014
Profile rubber adhesive RBRADH-RUBBER-MOULDING-ADHESIVE-250ML
€21.24 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Contact adhesive for universal use

Good adhesion properties on a wide variety of substrates

  • High initial adhesion
  • Quick drying

Easy to use

  • Ready to use
  • Handy can with brush
  • Easy to spread

Resistant to the effects of water (including seawater), petrol, dilute acids and alkali solutions

Resistant to ageing

Cures to transparent

Silicone-free

Notice

Protect from exposure to direct sunlight and heat. The profile rubber cement should be kept cool and dry and stored at temperatures between +15°C and +25°C

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Contact adhesive for universal use

Good adhesion properties on a wide variety of substrates

  • High initial adhesion
  • Quick drying

Easy to use

  • Ready to use
  • Handy can with brush
  • Easy to spread

Resistant to the effects of water (including seawater), petrol, dilute acids and alkali solutions

Resistant to ageing

Cures to transparent

Silicone-free

Notice

Protect from exposure to direct sunlight and heat. The profile rubber cement should be kept cool and dry and stored at temperatures between +15°C and +25°C

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application area

Typical applications are door and window rubbers, seals, insulating mats and linings in cars, caravans and boats, as well as bonding bases and PU foam sheets. Not suitable for laying carpet!



Suitable for bonding rubber profiles, solid rubber, cellular rubber, natural rubber, leather, linen, felt, soft foam, rigid PVC, butyl rubber, various plastics to metals (bare, primed, painted), wood, fibre cement boards, veneers, cork, cardboard and paper.

Instructions

Please note the processing temperature


  • Cool adhesive must be tempered (at least 3 days at +25°C to +35°C) and stirred.

  • Adhesives and the surfaces to be adhered should not be processed below +18°C


The surfaces of the workpieces to be adhered must be clean, dry and free of dust and grease


Surfaces such as leather and rubber should be carefully roughened.



  • Stir well before use and then evenly and thinly apply to the whole of the surfaces to be bonded using a brush.

On absorbent surfaces (e.g. felt), further adhesive should be applied


  • As soon as the surfaces are dry but still slightly sticky to the touch (finger test), the parts must be bonded by briefly and firmly pressing them together.

  • Once the flash-off time has been exceeded, the joint components with the adhesive can be heated up to +50°C and then pressed together.

  • The pressing force depends on the hardness of the material, the press duration is typically 8 - 15 seconds.


Curing time: approx. 48 hours at room temperature

Products specifications
Chemical basis Polychloroprene
Colour Amber
Density 0.83 g/cm³
Min./max. processing temperature 18 to 35 °C
Min./max. temperature resistance -20 to 80 °C
Solvent-free No
Silicone-free Yes
Contents 250 ml
Weight of content 207 g
Shelf life from production 24 Month

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Chemical basis Polychloroprene
Colour Amber
Density 0.83 g/cm³
Min./max. processing temperature 18 to 35 °C
Min./max. temperature resistance -20 to 80 °C
Solvent-free No
Silicone-free Yes
Contents 250 ml
Weight of content 207 g
Shelf life from production 24 Month
Close