Close
Filters
Search

Retouching paint pens, assortment

Article No. 09648901
Retouching paint pen assortment RETCHSTCK-SET-10PCS
€139.42 inc. VAT price per 1 PCS
LOW STOCK
*
+ -
For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Easy and quick to apply

  • No brush and paint pot required
  • Ready to use immediately and quick-drying

Wide range of colours

Matching colours for a wide range of different wood colours.

Good adhesion

  • Adheres to many surfaces, making it suitable for universal use
  • Resistant to smearing and scratch-resistant

Suitable for indoor and outdoor use

Notice

The retouching pens are not refillable.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For recolouring and covering edges and scratches as well as for pre-colouring damaged areas. A sprung pen tip provides an even flow of paint and therefore optimum results.

Easy and quick to apply

  • No brush and paint pot required
  • Ready to use immediately and quick-drying

Wide range of colours

Matching colours for a wide range of different wood colours.

Good adhesion

  • Adheres to many surfaces, making it suitable for universal use
  • Resistant to smearing and scratch-resistant

Suitable for indoor and outdoor use

Notice

The retouching pens are not refillable.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

For recolouring and covering edges, scratches, chafe marks, minor touch-up defects and mitre grooves as well as correcting wood colours. Optimum paint quality for a continuous flow of paint. For both indoor and outdoor use.

Instructions

Shake the pin for approx. 30 seconds before use. The stirring balls must be clearly audible. Remove the pen lid and hold the pen with the tip pointing upwards. The pen is audibly vented by briefly pressing on "P". Then point the tip downwards to activate the pen. The tip is slowly filled with paint by carefully pressing on "P". Apply light pressure to use the pen at a flat angle (approx. 45°). The valve opens and the paint flows evenly and continues to do so. During application, avoid pressing on "P", as this can lead to an uncontrolled flow of paint. Thanks to the new shape of the tip, it is also easy to work hard-to-reach areas (corners, narrow areas) with precision.

Products specifications
Density0.94 g/cm³
Density conditionsat 20°C
Min. grip strength2 min
Max. grip strength5 min
Grip strength conditionsdepending on room temperature and layer thickness
Min. dust-drying time1 min
Max. dust-drying time2 min
Conditions for dust-drying timedepending on room temperature and layer thickness
Ignition temperature350 °C
Min. flashing point19 °C
Number of pieces in assortment/set10 PCS
Light-fastnessGood
Water-solubleNo
Shelf life from production24 Month

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet 1

Products specifications
Density0.94 g/cm³
Density conditionsat 20°C
Min. grip strength2 min
Max. grip strength5 min
Grip strength conditionsdepending on room temperature and layer thickness
Min. dust-drying time1 min
Max. dust-drying time2 min
Conditions for dust-drying timedepending on room temperature and layer thickness
Ignition temperature350 °C
Min. flashing point19 °C
Number of pieces in assortment/set10 PCS
Light-fastnessGood
Water-solubleNo
Shelf life from production24 Month
Close