Close
Search

Surface cleaner Activating Cleaner

Article No. 089010060
Surface activating cleaner CLNR-STRUCADH-ACTIVATINGCLEANER-400ML
€24.58 inc. VAT price per 1 PCS
Available on Order
Price may vary
+ -
*
Surface optimisation of non-porous surfaces
Notice

Suitable for aluminium (anodised), steel, high-grade steel (stainless), galvanised steel (hot-dipped or galvanic), 2-component top coat, (PU, epoxy), 2-component water-based primers and paints, cathodic dip painting, primers (EP/2-component), powder coatings, glass fibre-reinforced plastic (unsaturated polyester), laminate gelcoat or SMC, glass fibre-reinforced plastic (unsaturated polyester), laminate layup, ABS, hard PVC, glass (mineral) and glass ceramic. Not suitable for smoothing or removing adhesives/sealants.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Surface optimisation of non-porous surfaces
Notice

Suitable for aluminium (anodised), steel, high-grade steel (stainless), galvanised steel (hot-dipped or galvanic), 2-component top coat, (PU, epoxy), 2-component water-based primers and paints, cathodic dip painting, primers (EP/2-component), powder coatings, glass fibre-reinforced plastic (unsaturated polyester), laminate gelcoat or SMC, glass fibre-reinforced plastic (unsaturated polyester), laminate layup, ABS, hard PVC, glass (mineral) and glass ceramic. Not suitable for smoothing or removing adhesives/sealants.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Products specifications
Chemical basis Solvent mixture with additives
Smell/fragrance Alcohol
Colour Transparent
Density 0.79 g/cm³
Min. flash-off time 10 min
Flash-off time conditions at 23°C and 50% relative humidity, as a primer, corrosion protection, activator
Min. flashing point 12 °C
Shelf life from production 24 Month
AOX-free Yes
Contents 400 ml
Weight of content 316 g
Close