Close
Filters
Search

Activator

Article No. 089330120
Activator for cyanoacrylate adhesive ACT-SUPGLU-CYANACRYLATE-150ML
€13.92 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
To accelerate the curing of superglues
NoticeUsing the activator may reduce the final strength of the adhesive used by about 20% compared to ideal values.The activator is very compatible with common plastics. However, when used for the first time, it should be tested in an invisible location to check whether the plastic is resistant to the activator (as a precautionary measure).

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

To accelerate the curing of superglues
NoticeUsing the activator may reduce the final strength of the adhesive used by about 20% compared to ideal values.The activator is very compatible with common plastics. However, when used for the first time, it should be tested in an invisible location to check whether the plastic is resistant to the activator (as a precautionary measure).

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application area

The activator accelerates the curing of superglues and should always be used where adhesion must occur within seconds or if inactive materials (e.g. metals) or excessive gaps are present. Adhesive surpluses can also be fully cured by subsequent spraying.

Instructions

The activator can be applied to the respective cleaned surface using a small sponge, brush, or by immersing or spraying. Apply the activator on one side, at least 2 minutes before the adhesive. The activator must evaporate completely before the parts are joined!


The adhesive is always applied to the untreated surface. No more than 10 minutes should elapse between applying the activator and the adhesive.

Products specifications
Chemical basis Aliphatic hydrocarbon
Density 0.7 g/cm³
Smell/fragrance Characteristic
Colour Transparent
Shelf life from production/conditions 24 Month / at room temperature
Contents 150 ml

Datasheets(1)

Safety data sheet 1

Products specifications
Chemical basis Aliphatic hydrocarbon
Density 0.7 g/cm³
Smell/fragrance Characteristic
Colour Transparent
Shelf life from production/conditions 24 Month / at room temperature
Contents 150 ml
Close