My account

Filters

Adhesive sealant Multi PU marine

Article No. 08932913

Adhesive sealant, Multi PU Marine STRUCADH-(MARINE-MULTI-BS)-BLACK-310ML

€8.86 inc. VAT price per 1 PCS

AVAILABLE

Packaging Unit *

Qty:

+ -

Versatile elastic 1-component PU adhesive and sealant for marine applications

Broad adhesive range

Excellent adhesion on a wide range of materials

Elastic

Different material expansions are compensated for by high elasticity
Dampens vibrations and noise

Slow skin formation time

For bonding and/or sealing of large components
Joint parts can be repositioned

Can be sanded and painted over

Mechanical processing is possible once the skin forms
The sealant can be painted over, subject to restrictions

Effective resistance to chemicals, ageing and weathering

Lasting resistance to water, salt water, diluted acids and alkalines
Resistant short-term to fuels, mineral oils, vegetable and animal fats and oils

Low-odour

Silicone-free

Notice

Not suitable for deck caulking (sealing wooden planks on ship decks).
Do not bring into contact with alkyd resin paint systems, unhardened SMP, hybrid-PU or silicone sealants.
Alcohol should not be used to prepare for bonding, as it interferes with the curing process and causes the adhesive sealant to fail.
Due to the reduced adhesive strength at elevated temperatures, use of this product above 90°C is not recommended.
When painting over the sealant, it must be taken into account that the thickness and hardness of the paint film may impair the adhesive's elasticity and thereby cause cracks. Solvent-based marine paints may not cure on hardened Multi PU Marine adhesive sealant. Preliminary tests are therefore strongly recommended.
Prolonged contact with chemicals (teak cleaner, oxalic acid, petrol, strong solvents and other harsh chemicals) can lead to permanent softening of the adhesive sealant.

Proof of Performance

EC type examination certificate: Approved for bonding in shipbuilding and boat building.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Specification
Application
Technical Information
Documents

Versatile elastic 1-component PU adhesive and sealant for marine applications

Broad adhesive range

Excellent adhesion on a wide range of materials

Elastic

Different material expansions are compensated for by high elasticity
Dampens vibrations and noise

Slow skin formation time

For bonding and/or sealing of large components
Joint parts can be repositioned

Can be sanded and painted over

Mechanical processing is possible once the skin forms
The sealant can be painted over, subject to restrictions

Effective resistance to chemicals, ageing and weathering

Lasting resistance to water, salt water, diluted acids and alkalines
Resistant short-term to fuels, mineral oils, vegetable and animal fats and oils

Low-odour

Silicone-free

Notice

Not suitable for deck caulking (sealing wooden planks on ship decks).
Do not bring into contact with alkyd resin paint systems, unhardened SMP, hybrid-PU or silicone sealants.
Alcohol should not be used to prepare for bonding, as it interferes with the curing process and causes the adhesive sealant to fail.
Due to the reduced adhesive strength at elevated temperatures, use of this product above 90°C is not recommended.
When painting over the sealant, it must be taken into account that the thickness and hardness of the paint film may impair the adhesive's elasticity and thereby cause cracks. Solvent-based marine paints may not cure on hardened Multi PU Marine adhesive sealant. Preliminary tests are therefore strongly recommended.
Prolonged contact with chemicals (teak cleaner, oxalic acid, petrol, strong solvents and other harsh chemicals) can lead to permanent softening of the adhesive sealant.

Proof of Performance

EC type examination certificate: Approved for bonding in shipbuilding and boat building.

Application area

1-component polyurethane adhesive and sealant specially developed for use in boat building and shipbuilding.

For variable, waterproof, weather-resistant sealing tasks and simple bonding for indoor and outdoor use, including below the water line after curing. Typical applications include sealing work in bathrooms, simple bonding of furniture or anti-skid plates, and use in the processing of decorative panels.

Multi PU Marine adhesive sealant impresses with its broad adhesive strength properties on the relevant surface materials such as wood, aluminium, polyester, PVC, natural stone, fibreglass and metals. Not suitable for teak, PE, PP, PTFE, silicone rubber, polystyrene and softened plastics.

Instructions

The surfaces must be clean, dry and free from dust and grease. The surfaces must be clean, dry and free from dust and grease. The best adhesion results are achieved by pre-treating the surfaces with Activating Cleaner and AdhesionPlus Metal surface cleaners or Bond and Seal Adhesion Plus for plastic/wood/stone. Smoothing must be done during the adhesive's skin-formation time. Material that has not cured can be removed using adhesive remover. Hardened material can only be removed mechanically. Multi PU Marine adhesive sealant can be painted over once the skin has formed, although preliminary tests should first be performed to verify paint compatibility.

Products specifications

Contents	310 ml
Container	Cartridge
Colour	Black
Chemical basis	Moisture curing 1K polyurethane
Full curing speed/conditions	3 mm/d / 23°C and 50% relative humidity
Density/conditions	1.15 g/cm³ / at 20°C
Shore A hardness	40
Min. combined tension and shear resistance	1.4 N/mm²
Min./max. processing temperature	5 to 35 °C
Max. short-term temperature resistance	90 °C
Min./max. temperature resistance	-40 to 80 °C
Ultraviolet resistance	Yes
Shelf life from production/conditions	12 Month / at max. 25°C
VOC-free	Yes
Resistance against	Water<br>Salt water<br>Diluted acids and lyes
Short-term resistance against	Mineral oils<br>Fuels<br>Vegetable oils<br>Animal oils<br>Oils
Shelf life from production	12 Month

Datasheets(1)

Safety data sheet 1

Certificates/Documents(4)

Technical data sheet 1

Certification/certificate 1

Clearance certificate 1

Clearance certificate 2

Products specifications

Contents	310 ml
Container	Cartridge
Colour	Black
Chemical basis	Moisture curing 1K polyurethane
Full curing speed/conditions	3 mm/d / 23°C and 50% relative humidity
Density/conditions	1.15 g/cm³ / at 20°C
Shore A hardness	40
Min. combined tension and shear resistance	1.4 N/mm²
Min./max. processing temperature	5 to 35 °C
Max. short-term temperature resistance	90 °C
Min./max. temperature resistance	-40 to 80 °C
Ultraviolet resistance	Yes
Shelf life from production/conditions	12 Month / at max. 25°C
VOC-free	Yes
Resistance against	Water<br>Salt water<br>Diluted acids and lyes
Short-term resistance against	Mineral oils<br>Fuels<br>Vegetable oils<br>Animal oils<br>Oils
Shelf life from production	12 Month