Cleaning glove Clay series

Article No. 0585300210

Half glove clay-series POLPAD-MITT-L210-W140MM

€43.66 inc. VAT price per 1 PCS

AVAILABLE

Packaging Unit *

Qty:

+ -

Efficient deep cleaning and perfect preparation of painted surfaces for the best polishing results

Easily removes stubborn residues and stains from painted surfaces that cannot be removed by conventional cleaning, producing a mirror-like finish.
Especially gentle cleaning owing to very low heat development and by excluding aggressive cleaning agents.
Washable and reusable
Considerable time, energy and cost savings
Very easy to apply

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Specification
Application
Technical Information
Documents

Efficient deep cleaning and perfect preparation of painted surfaces for the best polishing results

Easily removes stubborn residues and stains from painted surfaces that cannot be removed by conventional cleaning, producing a mirror-like finish.
Especially gentle cleaning owing to very low heat development and by excluding aggressive cleaning agents.
Washable and reusable
Considerable time, energy and cost savings
Very easy to apply

Application area

For fast and effortless removal of paint spray mist, resin, tar and insect remains, especially in the detailing of new and used vehicles. Painted surfaces, glass, chrome, etc.

Instructions

Rinse the area to be cleaned and the cleaning pad thoroughly with water or PH neutral car shampoo (we recommend highly diluted R1 cleaner art. 0893125005). Then treat the damp surface with the cleaning pad, without applying pressure. To clean with the cleaning pad, the surface and the cleaning pad must always be damp. We recommend moistening the surface and the cleaning pad with a pump spray bottle as required during the cleaning process.

After completing the cleaning process, simply remove any residue with a microfibre cloth. The surface is perfectly prepared for polishing or sealing.

Products specifications