My account

Filters

Corrosion protection spray

Article No. 089315

Corrosion protection spray CORRPROT-SPR-300ML

€12.98 inc. VAT price per 1 PCS

AVAILABLE

Packaging Unit *

Qty:

+ -

Creep capacity, colourless special fluid

Low-viscosity special oil with excellent creep properties

Also protects hard-to-reach areas
Prevents corrosion from progressing

Very good material compatibility on various surfaces

e.g. painted surfaces, metals and plastics. Broad range of uses.

Self-closing protective film that does not become touch-dry

Scratches, stone impacts etc. are automatically re-sealed
No areas for liquids to attack

Economical

Saves time and money

Excellent salt water resistance in line with DIN 50021

Optimum protection, even in extremely harsh conditions

Notice

This information is only a recommendation based on our experience. Check material compatibility on an invisible area if necessary.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Specification
Application
Technical Information
Documents

Creep capacity, colourless special fluid

Low-viscosity special oil with excellent creep properties

Also protects hard-to-reach areas
Prevents corrosion from progressing

Very good material compatibility on various surfaces

e.g. painted surfaces, metals and plastics. Broad range of uses.

Self-closing protective film that does not become touch-dry

Scratches, stone impacts etc. are automatically re-sealed
No areas for liquids to attack

Economical

Saves time and money

Excellent salt water resistance in line with DIN 50021

Optimum protection, even in extremely harsh conditions

Notice

This information is only a recommendation based on our experience. Check material compatibility on an invisible area if necessary.

Application area

For preserving tools or machine and vehicle attachments, e.g. snow chains or roof racks. Can be used in hard-to-reach places in the engine compartment and on bodywork seams and wheel wells. Optimum protection for motorcycles and bicycles, particularly when put into storage for the winter. Ideally suited for all surfaces on parts and fittings exposed to high levels of salinity, e.g. near the coast or at sea. Boat engines and attachments are optimally preserved.

Instructions

Clean and dry the surfaces to be treated. Then apply a thin coating of corrosion protection spray. For optimum protection, repeat application every 6 months.

Products specifications