Close
Filters
Search

Cutting and drilling oil CUT+COOL Perfect

Article No. 0893050008
Drilling/cutting oil CUT+COOL Perfect CUTOIL-PERFECT-(CUT-COOL)-400ML
€13.38 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
High-performance cutting oil for the heaviest machining work and higher cutting speeds

Safe and efficient to use

  • Optimum results and safety for all materials and applications
  • Longer tool life
  • High corrosion protection
  • Can be welded without advance cleaning for low quantities

Can be used as minimum quantity lubricant

Optimum performance and best results thanks to specially coordinated components

Reliable performance, even on tools with incorrect settings

Notice

Free from chlorine, silicone, heavy metals and resin. Free from substances that impair wetting of paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

High-performance cutting oil for the heaviest machining work and higher cutting speeds

Safe and efficient to use

  • Optimum results and safety for all materials and applications
  • Longer tool life
  • High corrosion protection
  • Can be welded without advance cleaning for low quantities

Can be used as minimum quantity lubricant

Optimum performance and best results thanks to specially coordinated components

Reliable performance, even on tools with incorrect settings

Notice

Free from chlorine, silicone, heavy metals and resin. Free from substances that impair wetting of paint.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Optimum application for all machining applications on all materials such as steel, high-alloy steel, aluminium, non-ferrous metals, titanium, hard metal, cast metal etc.

Products specifications
Contents 400 ml
Container Aerosol can
Colour Yellow orange
Smell/fragrance Oil
Chemical basis Mineral oil with synthetic ester
Shelf life from production 24 Month
Density 0.835 g/cm³
Density conditions at 20°C
Acid-free Yes
Chlorine-free Yes
Free from heavy metals Yes
Min. flashing point 170 °C
Silicone-free Yes
Resin-free Yes
Kinematic oil basis viscosity 25 mm²/s
Paint-wetting impairment substances Yes

Würth Catalogue(2)

Catalogue page as PDF 1 |  2 |  3

Flip catalog

Datasheets(1)

Safety data sheet 1

Products specifications
Contents 400 ml
Container Aerosol can
Colour Yellow orange
Smell/fragrance Oil
Chemical basis Mineral oil with synthetic ester
Shelf life from production 24 Month
Density 0.835 g/cm³
Density conditions at 20°C
Acid-free Yes
Chlorine-free Yes
Free from heavy metals Yes
Min. flashing point 170 °C
Silicone-free Yes
Resin-free Yes
Kinematic oil basis viscosity 25 mm²/s
Paint-wetting impairment substances Yes
Close