Close
Filters
Search

Drilling and cutting paste Cut and Cool Perfect

Article No. 0893050010
Drilling/cutting paste CUT+COOL CUTPAST-DRILL-(CUT-COOL-PERFECT)-500ML
€46.48 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Optimum results and safety for all materials and applications

Safe and efficient to use

  • Longer tool service life
  • High corrosion protection
  • Can be welded without advance cleaning for low quantities

Can be used as minimum quantity lubricant

Optimum performance, optimum results thanks to specifically matched components

Paste for the most challenging machining tasks

  • Machining of highest-strength steels fully possible
  • Horizontal and overhead applications entirely implementable

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Optimum results and safety for all materials and applications

Safe and efficient to use

  • Longer tool service life
  • High corrosion protection
  • Can be welded without advance cleaning for low quantities

Can be used as minimum quantity lubricant

Optimum performance, optimum results thanks to specifically matched components

Paste for the most challenging machining tasks

  • Machining of highest-strength steels fully possible
  • Horizontal and overhead applications entirely implementable

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

The drilling and cutting paste is particularly ideal for the most challenging machining processes, e.g. for highest-strength steels, tool steel, ball bearing steel, Cr-Ni alloys and Hastelloy.

Products specifications
Contents 500 ml
Colour Brown
Chemical basis Mineral oil with synthetic ester
Density/conditions 0.88 g/cm³ / at 20°C
Shelf life from production 36 Month
Silicone-free Yes
Chlorine-free Yes
AOX-free Yes
Resin-free Yes

Würth Catalogue(2)

Catalogue page as PDF 1 |  2 |  3

Flip catalog

Datasheets(1)

Safety data sheet 1

Products specifications
Contents 500 ml
Colour Brown
Chemical basis Mineral oil with synthetic ester
Density/conditions 0.88 g/cm³ / at 20°C
Shelf life from production 36 Month
Silicone-free Yes
Chlorine-free Yes
AOX-free Yes
Resin-free Yes
Close