Close
Filters
Search

Freezer spray

Article No. 0890001200
Freezer spray FREZSPR-200ML
€22.30 inc. VAT price per 1 PCS
Available on Order
Price may vary
*
+ -
For universal use in repair and assembly work and for troubleshooting

Non-flammable!

In low voltage areas according to VDE 0100 (voltage range: <50 V (AC), <120 V (DC)) can also be used when energised.

Powerful cooling effect

  • Spray causes localised cooling down to –50°C
  • Ball bearings, bushings, shafts etc. fit easily into the tightest clearances

Creates an intended thermal overload

Faults in electrical circuits are quick to determine

Notice

Meets EU regulation (EU no. 517/2014)

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

For universal use in repair and assembly work and for troubleshooting

Non-flammable!

In low voltage areas according to VDE 0100 (voltage range: <50 V (AC), <120 V (DC)) can also be used when energised.

Powerful cooling effect

  • Spray causes localised cooling down to –50°C
  • Ball bearings, bushings, shafts etc. fit easily into the tightest clearances

Creates an intended thermal overload

Faults in electrical circuits are quick to determine

Notice

Meets EU regulation (EU no. 517/2014)

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

For cooling transistors, resistors and engine parts in the automotive sector, e.g. carburettor and injection systems, in order to test the function of cold start equipment. For preventing heat damage in the area around the sites of soldering operations.

Products specifications
Contents 200 ml
Colour Colourless
Shelf life from production 24 Month
Density 1.18 g/cm³
Density conditions at 20°C

Datasheets(1)

Safety data sheet

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Contents 200 ml
Colour Colourless
Shelf life from production 24 Month
Density 1.18 g/cm³
Density conditions at 20°C
Close