Close
Filters
Search

Plastic adhesion promoter SR

Article No. 5867000125
Plastic adhesion promoter SR UNDRCOAT-PLA-PRIMER-SR-400ML
€19.47 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Plastic adhesion promoter for use in spot repairs of plastic parts.

Even application rate

Even, thin moistening of the spot area

High yield due to constant atomisation pressure

Excellent adhesion properties

Dries quickly

Notice

Not suitable for PE, Styrofoam and synthetic resin-coated surfaces. After use, turn the can upside down and spray until the nozzle is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Plastic adhesion promoter for use in spot repairs of plastic parts.

Even application rate

Even, thin moistening of the spot area

High yield due to constant atomisation pressure

Excellent adhesion properties

Dries quickly

Notice

Not suitable for PE, Styrofoam and synthetic resin-coated surfaces. After use, turn the can upside down and spray until the nozzle is empty.

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

For plastic parts such as PP, PP/EPDM, ABS, SAN, PC, PA, PUR-RIM, R-TPU, PPO, PBT, PUR soft foam, UP-GF plastics.

Instructions

Lightly roughen the surface to be treated and clean thoroughly with silicone remover. The surface must be clean, dry and free from grease. Shake the can well for approx. 2 minutes before use. Apply one thin (1–2 µm) spray pass at a distance of approx. 20–30 cm. Can be painted after approx. 10 minutes with all commercially available top-coat systems.

Products specifications
Contents 400 ml
Chemical basis Resin
Colour Transparent
Density 0.75 g/cm³
Density conditions at 20°C
VOC concentration (CH) 728 g/l
Min. coating thickness 1 µm
Max. coating thickness 2 µm
Min. spraying distance 20 cm
Max. spraying distance 30 cm
Unleaded Yes
Shelf life from production 36 Month
Acid-free Yes
Chlorine-free Yes
Silicone-free Yes
Water-soluble Yes
Conditions for drying time at 20°C and 50% relative humidity
Min. drying time 15 min
Max. drying time 20 min
Max. proportion of solids 2.3 %

Würth Catalogue(2)

Catalogue page as PDF 1 |  2

Flip catalog

Datasheets(1)

Safety data sheet 1

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Contents 400 ml
Chemical basis Resin
Colour Transparent
Density 0.75 g/cm³
Density conditions at 20°C
VOC concentration (CH) 728 g/l
Min. coating thickness 1 µm
Max. coating thickness 2 µm
Min. spraying distance 20 cm
Max. spraying distance 30 cm
Unleaded Yes
Shelf life from production 36 Month
Acid-free Yes
Chlorine-free Yes
Silicone-free Yes
Water-soluble Yes
Conditions for drying time at 20°C and 50% relative humidity
Min. drying time 15 min
Max. drying time 20 min
Max. proportion of solids 2.3 %
Related Product
Close