Close
Filters
Search

Silicone acetate, crystal clear

Article No. 0892215
Silicone acetate, crystal clear SILSEAL-ACE-GLASSCLEAR-310ML
€28.91 inc. VAT price per 1 PCS
LOW STOCK
*
+ -
Crystal-clear sealant for joints in glass, display window and display case construction
  • Highly transparent
  • Permanently elastic
Notice

Use of a smoothing agent may cause the silicone to become cloudy.

For further information regarding application, please refer to the Würth Online Catalogue under "General notes on processing sealants"

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the wide range of applications and of storage and usage conditions, we cannot guarantee a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Crystal-clear sealant for joints in glass, display window and display case construction
  • Highly transparent
  • Permanently elastic
Notice

Use of a smoothing agent may cause the silicone to become cloudy.

For further information regarding application, please refer to the Würth Online Catalogue under "General notes on processing sealants"

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the wide range of applications and of storage and usage conditions, we cannot guarantee a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area
  • For sealing in glass, display window, display case and furniture construction.

  • Glass groove sealing is not recommended

  • Small-sized bonding for artistic applications, e.g. for glass ornaments, glass bricks.
Instructions

The substrate must be intact, clean, dry and free from grease, rust and water. Do not use in heavy rain. Note the joint dimensions, see technical data sheet. Prime joints with PE-filling material (art. 0875 ...). Re-work the silicone acetate dry before it forms a skin, since the use of a smoothing agent can cause silicone turbidity.

Products specifications
Container Cartridge
Contents 310 ml
Chemical basis Sauer silicones (acetate systems)
Colour Crystal clear
Density/conditions 1 g/cm³ / at 20°C
Continuous motion absorption 12.5 %
Shore A hardness 20
Min./max. processing temperature 5 to 40 °C
Min./max. temperature resistance -40 to 150 °C
Min./max. full curing speed /conditions 2-3 mm/d / 23°C and 50% relative humidity
Min. skin-formation time 10 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Min. breaking elongation 150 %
Fungicidal properties No

Datasheets(1)

Safety data sheet 1

Products specifications
Container Cartridge
Contents 310 ml
Chemical basis Sauer silicones (acetate systems)
Colour Crystal clear
Density/conditions 1 g/cm³ / at 20°C
Continuous motion absorption 12.5 %
Shore A hardness 20
Min./max. processing temperature 5 to 40 °C
Min./max. temperature resistance -40 to 150 °C
Min./max. full curing speed /conditions 2-3 mm/d / 23°C and 50% relative humidity
Min. skin-formation time 10 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Min. breaking elongation 150 %
Fungicidal properties No
Related Product
Close