Close
Filters
Search

Special adhesive

Article No. 089340
Special 2C adhesive ADH-GLS/MET-2C-SPECIAL
€6.37 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
For easy adhering of glass and metal to and with each other.

Impact and vibration-resistant adhesion

Permanent adhesion between glass and metal

Excellent chemical resistance

Highly resistant to dilute acids and bases, water, and alcohol

Notice
  • Do not expose to direct sunlight or use on very heated glass surfaces. Surfaces to be adhered must be level. Special adhesive does not have any gap-bridging properties
  • A layer of adhesive which is too thick or on a non-flat surface can lead to air pockets and a yellowish colour.
  • Not suitable for use in furniture construction.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

For easy adhering of glass and metal to and with each other.

Impact and vibration-resistant adhesion

Permanent adhesion between glass and metal

Excellent chemical resistance

Highly resistant to dilute acids and bases, water, and alcohol

Notice
  • Do not expose to direct sunlight or use on very heated glass surfaces. Surfaces to be adhered must be level. Special adhesive does not have any gap-bridging properties
  • A layer of adhesive which is too thick or on a non-flat surface can lead to air pockets and a yellowish colour.
  • Not suitable for use in furniture construction.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!

Application area

Inner rear-view mirrors in vehicles, metal bolts, hinges on exhibition side windows etc.

Instructions
  • 1. Thoroughly clean surfaces to be adhered with acetone cleaner and dry the surfaces. Then apply activator to the base surface

  • 2. Apply the adhesive to the metallic surface

  • 3. Press the metallic surface onto the glass surface for approx. 20 sec. Bonding has up to 50% of its load capacity after just 15 to 20 minutes
Products specifications
Contents1.5 ml
Chemical basisUrethane acrylate
ColourTransparent (hardened)
Density1.08 g/cm³
Smell/fragranceCharacteristic
Min. final strength12 h
Conditions for final strengthat 23°C and 55% relative humidity
Min. initial strength15 min
Min./max. processing temperature5 to 40 °C
Min./max. temperature resistance-55 to 120 °C
Min. combined tension and shear resistance14 N/mm²
Conditions for combined tension and shear resistancein accordance with EN 1465
Min. tensile strength25 N/mm²
Conditions for tensile strengthin accordance with DIN 53504
Solvent-freeYes
Min. flashing point100 °C
Product weight (per item)1.54 g

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet 1 |  2

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Contents1.5 ml
Chemical basisUrethane acrylate
ColourTransparent (hardened)
Density1.08 g/cm³
Smell/fragranceCharacteristic
Min. final strength12 h
Conditions for final strengthat 23°C and 55% relative humidity
Min. initial strength15 min
Min./max. processing temperature5 to 40 °C
Min./max. temperature resistance-55 to 120 °C
Min. combined tension and shear resistance14 N/mm²
Conditions for combined tension and shear resistancein accordance with EN 1465
Min. tensile strength25 N/mm²
Conditions for tensile strengthin accordance with DIN 53504
Solvent-freeYes
Min. flashing point100 °C
Product weight (per item)1.54 g
Close