Close
Filters
Search

Filler Light filler

Article No. 0892162310
Filler, light filler FILR-(GAP-JOINTFILLER)-WHITE-310ML
€4.45 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Light filler for filling joints, cracks and holes in wall and ceiling surfaces

Ready to apply

Quick to apply

Virtually shrink-free

Cracks do not form

Easy to paint

Can be painted over with emulsion paints

Easy to sand

200 μm grain size fraction max. 1%

Notice

Please note that these values merely serve as empirical values. It should therefore be noted that the hardening time increases with thicker joints.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Light filler for filling joints, cracks and holes in wall and ceiling surfaces

Ready to apply

Quick to apply

Virtually shrink-free

Cracks do not form

Easy to paint

Can be painted over with emulsion paints

Easy to sand

200 μm grain size fraction max. 1%

Notice

Please note that these values merely serve as empirical values. It should therefore be noted that the hardening time increases with thicker joints.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

The light filler is suitable for filling joints, cracks and holes in walls and ceilings (e.g. gypsum plasterboard, acoustic panels). Small uneven areas in surfaces on walls can also be compensated, such as those that become visible when scraping off wallpaper. Can also be used in model construction.

Instructions

The surface must be clean, dry and free from dust and grease.


Using a cartridge or spatula, apply and spread the light filler to the joint, crack or hole. With joints, the protruding joint compound can be cut away with a cutting blade after approx. 15–20 minutes.

Products specifications
Chemical basis Acrylate dispersion
Density 0.57 g/cm³
Viscosity/consistency Pasty
Min./max. processing temperature 5 to 30 °C
Min./max. curing time 6-8 h
Grain size 200 µm
Colour White
Contents 310 ml
Container Cartridge
Shelf life from production 12 Month
Conditions to maintain shelf life from production at 5°C to 25°C
Max. temperature resistance of the hardened material -15 °C
Min. curing time 6 h
Max. curing time 8 h
Curing time conditions depending on layer thickness
Recoatable/Can be painted over Yes, after 15-20 minutes
Additional articles Cartridge gun, art. prefix no. 0891...
Products specifications
Chemical basis Acrylate dispersion
Density 0.57 g/cm³
Viscosity/consistency Pasty
Min./max. processing temperature 5 to 30 °C
Min./max. curing time 6-8 h
Grain size 200 µm
Colour White
Contents 310 ml
Container Cartridge
Shelf life from production 12 Month
Conditions to maintain shelf life from production at 5°C to 25°C
Max. temperature resistance of the hardened material -15 °C
Min. curing time 6 h
Max. curing time 8 h
Curing time conditions depending on layer thickness
Recoatable/Can be painted over Yes, after 15-20 minutes
Additional articles Cartridge gun, art. prefix no. 0891...
Close