Close
Filters
Search

High-temperature silicone

Article No. 0892330
Silicone sealant, high temperature SILSEAL-HITEMP-CARTRIDGE-RED-310ML
€16.40 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Special sealant for joints subject to high temperatures

High thermal stability

Temperature resistant up to +285°C, briefly up to +300°C

High resistance to large number of chemicals

Suitable for joints subject to chemical loads (see resistance list).

Resistant to ageing and UV

Proof of Performance

Classified in accordance with DIN 4102 B2 – normal flammability (in cured state).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Special sealant for joints subject to high temperatures

High thermal stability

Temperature resistant up to +285°C, briefly up to +300°C

High resistance to large number of chemicals

Suitable for joints subject to chemical loads (see resistance list).

Resistant to ageing and UV

Proof of Performance

Classified in accordance with DIN 4102 B2 – normal flammability (in cured state).

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area
  • For sealing in the construction of furnace units, heating units, air conditioners, washing machines and dryers

  • No primer required: Stainless steel, enamel, glass, tiles

  • Primer required: aluminium (bare, anodised and powder-coated), chrome

Please observe the "General Notes on Application for Sealants" overview sheet.

Products specifications
Contents 310 ml
Container Cartridge
Chemical basis Sauer silicones (acetate systems)
Smell/fragrance Vinegar
Colour Red brown
Continuous motion absorption 20 %
Min. skin-formation time 8 min
Min. breaking elongation 350 %
Shore A hardness 30
Min./max. temperature resistance -50 to 250 °C
Min./max. skin-formation time 8-12 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Fungicidal properties No
Density 1.05 g/cm³
Max. short-term temperature resistance 300 °C
Min./max. processing temperature 5 to 40 °C
Surface pre-treatment required On porous surfaces
Ultraviolet resistance Yes
Min. flashing point 250 °C
Coating compatibility Yes
Resistance against Aging
Recoatable/Can be painted over No
Building material class B2 - Normally inflammable
Shelf life from production 24 Month
Conditions to maintain shelf life from production at max. 25°C

Würth Catalogue(2)

Catalogue page as PDF 1 |  2 |  3 |  4 |  5

Flip catalog

Datasheets(1)

Safety data sheet 1

Products specifications
Contents 310 ml
Container Cartridge
Chemical basis Sauer silicones (acetate systems)
Smell/fragrance Vinegar
Colour Red brown
Continuous motion absorption 20 %
Min. skin-formation time 8 min
Min. breaking elongation 350 %
Shore A hardness 30
Min./max. temperature resistance -50 to 250 °C
Min./max. skin-formation time 8-12 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Fungicidal properties No
Density 1.05 g/cm³
Max. short-term temperature resistance 300 °C
Min./max. processing temperature 5 to 40 °C
Surface pre-treatment required On porous surfaces
Ultraviolet resistance Yes
Min. flashing point 250 °C
Coating compatibility Yes
Resistance against Aging
Recoatable/Can be painted over No
Building material class B2 - Normally inflammable
Shelf life from production 24 Month
Conditions to maintain shelf life from production at max. 25°C
Related Product
Close