Close
Filters
Search

PC adhesion agent

Article No. 5867000150
PC adhesion promoter UNDRCOAT-PLA-(PC-PRIMER)-250ML
€19.71 inc. VAT price per 1 PCS
Available on Order
Price may vary
*
+ -
Colourless 1C primer for repairing damage to diffusers in vehicle headlights.
  • Wide beam atomisation
  • High paint output quantity
  • Continuous atomisation pressure up to complete emptying of can
  • Professional paint results

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Colourless 1C primer for repairing damage to diffusers in vehicle headlights.
  • Wide beam atomisation
  • High paint output quantity
  • Continuous atomisation pressure up to complete emptying of can
  • Professional paint results

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting with deliberate intent. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application area

Application is recommended for repairing headlights. Polycarbonate surfaces are suitable in this respect.

Instructions

Step 1: Pretreatment of headlights


  • Cleaning

  • Dry sanding

  • Wet sanding

  • Checks (if necessary rework)


Step 2: Application of primer


  • Mask off rear part of headlamp

  • Clean ground parts

  • Clean headlight with tack rag and aqua silicon remover

  • Shake can thoroughly for 2 minutes and test spray

  • Apply PC primer in 1.5 spraying processes and allow to air dry for 40 minutes at 20°C


Step 3: Application of clear varnish


  • Coat headlights with Rapid 2C clear varnish for protective properties
Products specifications
Shelf life from production 24 Month

Datasheets(1)

Safety data sheet

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Shelf life from production 24 Month
Related Product
Close