Close
Filters
Search

Primer Rust Stop Quattro

Article No. 08932141
Rust-Stop Quattro primer PRIM-(ROSTSTOP QUATTRO)-400ML
€19.35 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Fast-drying universal primer with a broad range of applications

Unique combination of primer, adhesion promoter, corrosion protection and welding substrate in one product

Primer

Anti-oxidation formula reliably prevents further rusting.

Adhesion promoter

  • Good substrate structure for further paintwork
  • Suitable for use in connection with PU and MS polymer sealing compounds

Corrosion protection

  • Outstanding, permanent protection against oxidation
  • Outstanding resistance to spray and salt water

Welding substrate

Full penetration welding possible wet and dry.

Very high temperature resistance up to 300°C, short-term resistance up to 500°C

VOC-compliant

  • Lower solvent content
  • Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)
Notice

Turn the can upside down and spray until the valve is empty after use.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Fast-drying universal primer with a broad range of applications

Unique combination of primer, adhesion promoter, corrosion protection and welding substrate in one product

Primer

Anti-oxidation formula reliably prevents further rusting.

Adhesion promoter

  • Good substrate structure for further paintwork
  • Suitable for use in connection with PU and MS polymer sealing compounds

Corrosion protection

  • Outstanding, permanent protection against oxidation
  • Outstanding resistance to spray and salt water

Welding substrate

Full penetration welding possible wet and dry.

Very high temperature resistance up to 300°C, short-term resistance up to 500°C

VOC-compliant

  • Lower solvent content
  • Complies with the maximum VOC content specified in the VOC Directive (1999/13/EC)
Notice

Turn the can upside down and spray until the valve is empty after use.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Freight forwarding companies, transport companies, commercial vehicle repair workshops, vehicle construction, building trade, concrete mixing plants, agriculture, forestry, local authorities etc.

Instructions

The surface must be clean, dry and free from grease. Lightly sand problematic surfaces. Shake can well before use. Apply a thin coat for the first spray coating. Observe the flash-off time. Can be painted after approx. 20 minutes with all commercially available 1-component, 2-component and water-based top-coat paint systems.

Products specifications
Contents 400 ml
Chemical basis Polyvinyl butyral
Colour Silver grey
Max. processing temperature 40 °C
Density 0.75 g/cm³
Max. temperature resistance 300 °C
Max. short-term temperature resistance 500 °C
VOC concentration (CH) 669 g/l
Min. processing temperature 5 °C
Shelf life from production 24 Month

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet 1

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Contents 400 ml
Chemical basis Polyvinyl butyral
Colour Silver grey
Max. processing temperature 40 °C
Density 0.75 g/cm³
Max. temperature resistance 300 °C
Max. short-term temperature resistance 500 °C
VOC concentration (CH) 669 g/l
Min. processing temperature 5 °C
Shelf life from production 24 Month
Close