Close
Filters
Search

Quick hardening glue

Article No. 0892100111
Quick-setting glue QCKSTGLU-500G
€14.10 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
Very quick hardening universal glue for gluing all types of wood

Short setting time

High initial strength

Enables short pressing times

Transparent when dry

Complies with loading group D2 in accordance with DIN/EN 204

Interior applications with occasional short-term exposure to water

Notice

Application equipment should be made from stainless steel or plastic. Processing time depends on the material, humidity, temperature and application quantity. Please refer to the technical data sheet

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Very quick hardening universal glue for gluing all types of wood

Short setting time

High initial strength

Enables short pressing times

Transparent when dry

Complies with loading group D2 in accordance with DIN/EN 204

Interior applications with occasional short-term exposure to water

Notice

Application equipment should be made from stainless steel or plastic. Processing time depends on the material, humidity, temperature and application quantity. Please refer to the technical data sheet

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area
  • Indoor door gluing

  • Indoor stairs and railings

  • Surface gluing of laminated panels

  • Manual edge gluing

  • Joint, flush and dowel pin gluing of pinewood, hardwood and exotic woods
Instructions
  • Carrier material must be free from dust and grease, as well as free from all kinds of dirt that could damage bonding. Optimum wood moisture is between 8% and 12%.

  • Apply an even layer of glue on one side with a brush, spatula or a glue roller
Products specifications
Container Bottle
Weight of content 500 g
Colour White
Chemical basis Polyvinyl acetate dispersion
pH value 5
Viscosity 10500 mPas
Viscosity conditions Brookfield
Density 1.09 g/cm³
Min. proportion of solids 53 %
Min. film forming temperature 7 °C
Max. temperature resistance of the hardened material 70 °C
Shelf life from production 12 Month
Min./max. room temperature, material temperature and glue temperature 15 to 20 °C
Min./max. wood moisture 8-12 %
Min. wood moisture 8 %
Max. wood moisture 12 %
Min./max. open time 5-10 min
Conditions for open time at 20°C and 150 g/m²
Max. pressing pressure 0.7 N/mm²

Würth Catalogue(2)

Catalogue page as PDF 1 |  2

Flip catalog

Datasheets(1)

Safety data sheet

Certificates/Documents(1)

Technical data sheet 1

Products specifications
Container Bottle
Weight of content 500 g
Colour White
Chemical basis Polyvinyl acetate dispersion
pH value 5
Viscosity 10500 mPas
Viscosity conditions Brookfield
Density 1.09 g/cm³
Min. proportion of solids 53 %
Min. film forming temperature 7 °C
Max. temperature resistance of the hardened material 70 °C
Shelf life from production 12 Month
Min./max. room temperature, material temperature and glue temperature 15 to 20 °C
Min./max. wood moisture 8-12 %
Min. wood moisture 8 %
Max. wood moisture 12 %
Min./max. open time 5-10 min
Conditions for open time at 20°C and 150 g/m²
Max. pressing pressure 0.7 N/mm²
Close