If applied regularly, hardly any time-consuming brushing required
Up to 50% time saving per washing process
High cleaning effect
Silicone-free
No streaking after washing
Readily separates in accordance with Ö-Norm (Austrian standard) B5105
No waste water problems
Empty drums can be disposed of via DSD
Do not apply to hot surfaces or in direct sunlight!
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.
Concentrate for regular cleaning of large areas of bodywork, tarpaulin and chassis and engine on commercial vehicles, buses and passenger cars.
Depending on the degree of contamination, spray extra strong active foam uniformly on the vehicle from bottom to top using the foam device or the foam canon (recommended dilution: 2–4%) and leave to take effect for max. 5 minutes. Caution, do not allow to dry. Then thoroughly rinse the vehicle using a high-pressure cleaner and plenty of cold water at a lance distance of 15–20 cm, working from bottom to top (otherwise there is a risk of a lime film forming on the surface).
Datasheets(1)
Safety data sheet 1
Certificates/Documents(1)
Technical data sheet 1
Subscribe to our newsletter to be informed for our latest products and promotions
