Close
Filters
Search

Wax undercoating PLUS

Article No. 0892078100
Wax underbody seal PLUS UBS-WAX-PERMANENT-BLACK-1000ML
€18.15 inc. VAT price per 1 PCS
Available on Order
Price may vary
*
+ -
Wax-based coating compound containing solvents, cannot be painted over
  • Permanently elastic with self-healing effect
  • Paint-, rubber- and PVC-compatible
  • Resistant to spray water and salt water, weak acids and alkalis
  • Very high solids content
  • VOC reduced
  • Dust dry after 48 hours, then waxy
  • Yield: 876 g/1000 ml at 200 µm 0.28 litres/m2
Notice

Recommended dry layer thickness: At least 50 μm. Product must be stirred/shaken up before use! After application, turn the aerosol can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Wax-based coating compound containing solvents, cannot be painted over
  • Permanently elastic with self-healing effect
  • Paint-, rubber- and PVC-compatible
  • Resistant to spray water and salt water, weak acids and alkalis
  • Very high solids content
  • VOC reduced
  • Dust dry after 48 hours, then waxy
  • Yield: 876 g/1000 ml at 200 µm 0.28 litres/m2
Notice

Recommended dry layer thickness: At least 50 μm. Product must be stirred/shaken up before use! After application, turn the aerosol can upside down and spray until the valve is empty.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. If our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

For areas at risk of corrosion in bodywork such as sheet metal seams (folds, gaps, flanges), edges and surfaces. Excellent adhesion and very good stability on metallic surfaces

Instructions

Shake can well before use. The surface must be dry and free from rust, dirt or grease. Optimal spray distance 30 cm. Apply thinly. Operating pressure: 6 bar

Products specifications
Chemical basis Wax
Contents 1000 ml
Weight of content 1095 g
Colour Black
Min. proportion of solids 80 %
Conditions for through drying at 23°C, 50% relative humidity
Conditions for skin-formation time at 23°C and 50% relative humidity
Min. skin-formation time 48 h
Drying time 120 h
Conditions for drying time at 23°C and 50% relative humidity
Density 1.095 g/ml
Density conditions at 20°C
Shelf life from production 12 Month
Min. temperature conditions -30 °C

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet

Certificates/Documents

 | 

 | 

Products specifications
Chemical basis Wax
Contents 1000 ml
Weight of content 1095 g
Colour Black
Min. proportion of solids 80 %
Conditions for through drying at 23°C, 50% relative humidity
Conditions for skin-formation time at 23°C and 50% relative humidity
Min. skin-formation time 48 h
Drying time 120 h
Conditions for drying time at 23°C and 50% relative humidity
Density 1.095 g/ml
Density conditions at 20°C
Shelf life from production 12 Month
Min. temperature conditions -30 °C
Close