Close
Filters
Search

Bodywork adhesive Powerbond

Article No. 0893450100
Bodywork adhesive, Powerbond BDYWRKADH-2C-POWERBOND-CARTRIDGE-225ML
€77.25 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
High-strength 2-component epoxy resin system for bodywork repairs

High-strength epoxy resin adhesive

  • Repair restores the original strength and rigidity
  • Less spot welding
  • Meets the requirements of automotive manufacturers

Glass particle technology

An adhesive layer thickness of 0.7–1.2 mm is guaranteed even after heavy pressing

Excellent stability

Glue will not run on vertical surfaces (thixotropic)

Outstanding corrosion protection

  • Restores original rusting resistance
  • Prevents signs of rust at welding points

Weldable

Can be planed/painted

Silicone and VOC-free

Notice

Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). If bodywork parts are only partially replaced, do not glue on visible surfaces as "shadow seams" may appear. Observe the repair instructions provided by the vehicle manufacturer.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

High-strength 2-component epoxy resin system for bodywork repairs

High-strength epoxy resin adhesive

  • Repair restores the original strength and rigidity
  • Less spot welding
  • Meets the requirements of automotive manufacturers

Glass particle technology

An adhesive layer thickness of 0.7–1.2 mm is guaranteed even after heavy pressing

Excellent stability

Glue will not run on vertical surfaces (thixotropic)

Outstanding corrosion protection

  • Restores original rusting resistance
  • Prevents signs of rust at welding points

Weldable

Can be planed/painted

Silicone and VOC-free

Notice

Not suitable for load-bearing bodywork parts (e.g. A-pillars, longitudinal chassis beams etc.). If bodywork parts are only partially replaced, do not glue on visible surfaces as "shadow seams" may appear. Observe the repair instructions provided by the vehicle manufacturer.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

Structural adhesive for steel, aluminium and glass fibre-reinforced plastics (GFRP, CFRP). For bonding bodywork parts such as side walls, wheel arches, roof and door sheets.

Products specifications
Container Double cartridge
Chemical basis Epoxy resin
Colour Black
Density 1.1 g/cm³
Smell/fragrance Characteristic
Min. tensile strength 30 N/mm²
Min. combined tension and shear resistance 1.7 N/mm²
Conditions for combined tension and shear resistance after four hours, 23°C, EN 1465
Conditions for tensile strength at 23°C, in accordance with ASTM D-638
Shore D hardness 80
Conditions for Shore hardness in accordance with DIN 53505
Working life 60 min
Conditions for working life at 23°C
Curing time 4 h
Min./max. temperature resistance -30 to 120 °C
Min./max. processing temperature 15 to 25 °C
Max. short-term temperature resistance 190 °C
Max. final strength 72 h
Conditions for final strength at 23°C
Resistance against Petrol<br>Diesel<br>Cooling liquid<br>Engine and gear oils
VOC-free Yes
Silicone-free Yes
Shelf life from production 12 Month
Additional articles Acetone cleaner, art. 0893460; Quattro rust stop, art. 08932141; pneumatic axial grinder, art. 07032310; Flexi-Disc, art. 0578705 …; nylon fleece disc, art. 067322 50/75; mini fleece disc, art. 0673205.../207...; locking pliers, art. 071409...
Contents 225 ml

Würth Catalogue(2)

Catalogue page as PDF 1

Flip catalog

Datasheets(1)

Safety data sheet 1 |  2

Products specifications
Container Double cartridge
Chemical basis Epoxy resin
Colour Black
Density 1.1 g/cm³
Smell/fragrance Characteristic
Min. tensile strength 30 N/mm²
Min. combined tension and shear resistance 1.7 N/mm²
Conditions for combined tension and shear resistance after four hours, 23°C, EN 1465
Conditions for tensile strength at 23°C, in accordance with ASTM D-638
Shore D hardness 80
Conditions for Shore hardness in accordance with DIN 53505
Working life 60 min
Conditions for working life at 23°C
Curing time 4 h
Min./max. temperature resistance -30 to 120 °C
Min./max. processing temperature 15 to 25 °C
Max. short-term temperature resistance 190 °C
Max. final strength 72 h
Conditions for final strength at 23°C
Resistance against Petrol<br>Diesel<br>Cooling liquid<br>Engine and gear oils
VOC-free Yes
Silicone-free Yes
Shelf life from production 12 Month
Additional articles Acetone cleaner, art. 0893460; Quattro rust stop, art. 08932141; pneumatic axial grinder, art. 07032310; Flexi-Disc, art. 0578705 …; nylon fleece disc, art. 067322 50/75; mini fleece disc, art. 0673205.../207...; locking pliers, art. 071409...
Contents 225 ml
Related Product
Close