Close
Filters
Search

Engine protective lacquer

Article No. 0892790
Engine protective lacquer ENGPROTLAC-400ML
€9.44 inc. VAT price per 1 PCS
AVAILABLE
*
+ -
High-quality acrylic paint-based sealing of the engine compartment

New gloss on engines, assemblies, cables and hoses

Visually improving and maintaining/enhancing the value of engine compartments and assemblies

Forms a protective film

  • Protects from wet, dirt from the road as well as road salt, thereby preventing corrosion
  • Prevents leakage currents in electrical components

High degree of coating flexibility

High degree of flexibility on plastics, rubber hoses, cables etc.

Excellent temperature resistance (+80°C)

  • Prevents the engine protective lacquer from discolouring
  • Protects against softening of paints, and therefore against dust retention

Excellent adhesion to a wide variety of surfaces

High-gloss

Notice

Do not spray on painted surfaces or a hot engine

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

High-quality acrylic paint-based sealing of the engine compartment

New gloss on engines, assemblies, cables and hoses

Visually improving and maintaining/enhancing the value of engine compartments and assemblies

Forms a protective film

  • Protects from wet, dirt from the road as well as road salt, thereby preventing corrosion
  • Prevents leakage currents in electrical components

High degree of coating flexibility

High degree of flexibility on plastics, rubber hoses, cables etc.

Excellent temperature resistance (+80°C)

  • Prevents the engine protective lacquer from discolouring
  • Protects against softening of paints, and therefore against dust retention

Excellent adhesion to a wide variety of surfaces

High-gloss

Notice

Do not spray on painted surfaces or a hot engine

The usage instructions are recommendations based on the tests we have conducted and are based on our experience; carry out your own tests before each application. We do not assume any liability for a specific application result due to the large number of applications and storage and processing conditions. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and carry out further development.

Application area

Particularly suitable for detailing used cars

Instructions

Shake can well before use. Before use, thoroughly clean the areas to be treated with engine cleaner and allow to dry. With the ignition switched off, apply an even coat until a closed gloss film is formed. Turn the can upside down after use and spray until the valve is empty.

Products specifications
Chemical basis Acetone
Contents 400 ml
Weight of content 304 g
Drying time 10 min
Conditions for drying time at 20°C and 50% relative humidity
Dust-drying time 10 min
Max. temperature resistance 100 °C
Density 0.76 g/cm³
Density conditions at 20°C
Grip strength 50 min
VOC concentration (CH) 95.53 %
Shelf life from production 36 Month

Datasheets(1)

Safety data sheet 1

Products specifications
Chemical basis Acetone
Contents 400 ml
Weight of content 304 g
Drying time 10 min
Conditions for drying time at 20°C and 50% relative humidity
Dust-drying time 10 min
Max. temperature resistance 100 °C
Density 0.76 g/cm³
Density conditions at 20°C
Grip strength 50 min
VOC concentration (CH) 95.53 %
Shelf life from production 36 Month
Close