Close
Filters
Search

Floor joint sealant

Article No. 0892351200
Floor joint sealant food related areas JNTCOMPD-GREY-600ML ECOLINE
€20.86 inc. VAT price per 1 PCS
LOW STOCK
*
+ -
Single-component, solvent-free PU sealant for high-stress joints, both indoors and outdoors. Hazard label not required.

Very low emissions

Tested emissions properties

Approved for use with foodstuffs (ISEGA certificate)

Suitable for sealing in areas where food is processed or stored

Elastic

  • Compensates different material expansions
  • Dampens vibrations and noise

Prevents contact corrosion

Bubble-free curing system

Silicone-free

Proof of Performance

Tested in accordance with EN 15651 Part 4

  • Fire behaviour: Class E
  • Resistance to tearing: Passed
  • Volume loss: ≤ 10%
  • Tensile behaviour under pre-stress: Passed
  • Adhesion/expansion after being immersed in water for 28 days:
  • Passed
  • Adhesion/expansion after being immersed in salt water for 28 days: Passed
  • Tensile behaviour under pre-stress at -30°C: Passed
  • Durability: Passed

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Single-component, solvent-free PU sealant for high-stress joints, both indoors and outdoors. Hazard label not required.

Very low emissions

Tested emissions properties

Approved for use with foodstuffs (ISEGA certificate)

Suitable for sealing in areas where food is processed or stored

Elastic

  • Compensates different material expansions
  • Dampens vibrations and noise

Prevents contact corrosion

Bubble-free curing system

Silicone-free

Proof of Performance

Tested in accordance with EN 15651 Part 4

  • Fire behaviour: Class E
  • Resistance to tearing: Passed
  • Volume loss: ≤ 10%
  • Tensile behaviour under pre-stress: Passed
  • Adhesion/expansion after being immersed in water for 28 days:
  • Passed
  • Adhesion/expansion after being immersed in salt water for 28 days: Passed
  • Tensile behaviour under pre-stress at -30°C: Passed
  • Durability: Passed

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Application area

The floor joint sealant is ideally suited for joining moving and connection joints for indoor and outdoor use in concrete and screed exposed to static loads or rolling traffic, such as joints in storage halls, production halls, parking decks, courtyards, underground car parks, and on tiled floors in entrance halls and stairwells.

Instructions

Along with corresponding surface pre-treatment, PE backfill material must be inserted into the joint. It must be ensured that the sealant is inserted with no blisters or cavities and that there is complete contact with joint edges. Where required, the floor joint sealant is smoothed with the sealant smoothing agent.



For further information regarding application, and joint dimensions, please refer to the technical data sheet and the "General Notes on Application for Sealants".

Products specifications
Colour Grey
Contents 600 ml
Chemical basis Single component polyurethane
Density 1.35 kg/l
Continuous motion absorption 20 %
Min. temperature resistance -40 °C
Max. temperature resistance 80 °C
Min. surface processing temperature 5 °C
Max. surface processing temperature 40 °C
Min. processing temperature 5 °C
Max. processing temperature 40 °C
Min. skin-formation time 65 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Products specifications
Colour Grey
Contents 600 ml
Chemical basis Single component polyurethane
Density 1.35 kg/l
Continuous motion absorption 20 %
Min. temperature resistance -40 °C
Max. temperature resistance 80 °C
Min. surface processing temperature 5 °C
Max. surface processing temperature 40 °C
Min. processing temperature 5 °C
Max. processing temperature 40 °C
Min. skin-formation time 65 min
Conditions for skin-formation time at 23°C and 50% relative humidity
Related Product
Close