Filter by attributes
- Cable length
- Frequency
- Functions
- Height
- Idle speed 1st/2nd gear min./max.
- Impact energy
- Length
- Max. drilling diameter in steel
- Max. drilling diameter in wood
- Max. drilling diameter of hollow drill bit in masonry
- Max. torque hard/soft
- Min./max. drill chuck span width
- Min./max. drilling diameter in concrete
- Min./max. idle speed
- Min./max. impact rate
- Min./max. nominal voltage
- Min./max. recommended drilling range for optimum performance (in concrete)
- Min./max. rotation speed at nominal load
- Nominal Voltage
- Number of rechargeable batteries/batteries
- Power input
- Rechargeable battery/battery capacity
- Tool holding device
- Weight of machine
- Weight of machine with rechargeable battery
- Max. mitre angle
- Min./max. frequency
- Min./max. idle stroke speed
- Tip size
- Protection class
- Stroke length
- Suitable for bore diameter
- Drill chuck holder
- Max. cutting depth at 90 degrees
- Max. idle speed
- Max. torque
- Power output
- Impact rate
- Max. cutting depth at 45 degrees
- Max. cutting depth in wood
- Base plate length x base plate width
- Length x height
- Max. cutting depth in steel
- Number of pendulum-stroke stages
- Diameter of sanding plate
- Max. impact energy
- Max. rotation speed at nominal load
- Max. drilling diameter in softwood
- Max. saw-blade diameter
- Removal performance
- Adjustable chisel position
- Min./max. mitre angle
- Max. cutting depth in aluminium
- Max. drilling diameter in aluminium
- Max. drilling capacity (volume) in concrete per minute
- Max. drilling diameter of breakthrough drill in concrete
- Min./max. drilling diameter in steel
- Clamping neck diameter
- Max. chiselling power in concrete
- Max. thread-tapping diameter
- Max. drilling diameter in stainless steel
