Wishlist (0)
favorite Wishlist (0)
You have no items in your shopping cart.
Close
Menu
Menu
Filters
Search
favorite Wishlist (0)

Würth Metal

Picture for category Construction Safety

Construction Safety

Picture for category Construction Chemicals

Construction Chemicals

Picture for category Construction Tools

Construction Tools

Picture for category Construction Rails , Clamps and Accessories

Construction Rails , Clamps and Accessories

Picture for category Construction Power Tools

Construction Power Tools

Picture for category Construction Personal Care Cleaners

Construction Personal Care Cleaners

Picture for category Construction Discs

Construction Discs

Refine
×
Price Range
Shape of tip
Material compatibility
Min__max_ rotation speed at nominal load
Ultraviolet resistance
Full curing speed_conditions
Load_bearing capacity _single direct_
Thread type x nominal diameter x screw length
Length of head
Min_ temperature conditions
Min__max_ initial strength
Material of the bristles
Conditions for viscosity 2
Conditions for viscosity 1
Roll width
Stroke length
Width
6 More
Internal drive
Conditions for resistance in salt_spray test
Resistance in salt_spray test
Contents
5 More
Conditions for skin_formation time
Min_ prevail torque
Segment thickness
AOX_free
Material of the blade
Number of electrical poles
Diameter _ØD_
Min__max_ idle stroke speed
Dry layer thickness _first back_and_forth motion_
Min__max_ processing temperature _conditions
Chlorine_free
Min__max_ viscosity
Height
Min_ surface processing temperature
Material of the carrier disc
Suitable for mounting rail
4 More
IP protection class
Max_ drilling diameter in aluminium
Conditions for combined tension and shear resistance
Min__max_ processing temperature
Conditions for viscosity of oil basis
Height _H_
Material of the contacts
Chloric
Category
Number of pendulum_stroke stages
Max_ drilling capacity _volume_ in concrete per minute
Density_conditions
Silicone_free
Min_ temperature resistance
Drill chuck holder
Building material class
Elongation at break
Hammer weight
Cutting speed _point system_
Power output
2 More
Max_ temperature resistance
Degrees measuring accuracy for overhead measurements
Length of roll
Max_ drilling diameter of hollow drill bit in masonry
Cable length
Backing material
Min_ curing time
Tack_free after
Weight of machine
6 More
Elongated hole width _LB_
Max_ surface processing temperature
Material of abrasive medium
Glass transition temperature_conditions
Drive type
Thread type
Dynamic peel strength at 25 mm
Min__max_ grip range _ØD_
7 More
Min_ wet skin_formation time_conditions
Max_ cutting depth in steel
Viscosity conditions
Min_ combined tension and shear resistance
Cut quality _point system_
Clamping neck diameter
Conditions for being tack_free
Thread type x nominal diameter _G_
Min__max_ drill chuck span width
Length _l_
20 More
Container
Cross_cut test
Max_ short_term temperature resistance
Locking mechanism type
Resistance against
Power input
5 More
Min__max_ joint width
Material of safety lens
Max_ drilling diameter in steel
Max_ drilling diameter in softwood
Removal performance
Min__max_ nominal voltage
Max_ thread_tapping diameter
Length
4 More
Water_soluble
Number of pieces in assortment_set
Weight of content
Max_ rotation speed at nominal load
Frequency
Tool holding device
Rail length _L_
Min__max_ skin_formation time _conditions
Max_ cutting depth at 90 degrees
Chemical basis
2 More
Hole distance _LA_
Min_ longitudinal resistance to tearing
Surface
Nominal Voltage
Full load capacity_conditions
Min__max_ viscosity 2
Min__max_ viscosity 1
Suitable application gun
Colour
14 More
Min__max_ compressive shearing strength _conditions
Measuring accuracy for overhead measurements _per length_
Recoatable_Can be painted over
Spot weldable
Max_ gap_filling ability
Length of bristles
Material thickness _t_
Shelf life from production_conditions
Min__max_ temperature conditions
Min__max_ ambient temperature _ Conditions
Full curing speed
Min__max_ final strength
Dust_drying time
Max_ recommended rotation speed
Thickness
7 More
Halogen_free
Max_ working pressure
Min_ dry skin_formation time_conditions
Drill hole
Min_ breakaway torque
pH value_conditions
DIN
Colour of safety lens
Length of handle
Grip strength conditions
Elongation at break_conditions
Min_ tensile strength
Min__max_ grip strength
Max_ impact energy
NLGI grade
Width across flats
Max_ torque
Approval
Permissible load
Diameter of hole _RL_
Min_ flashing point
Type of spray head
Can be cut after
Resin_free
Max_ cutting depth at 45 degrees
Conditions for tensile strength
Protection class
Nominal diameter
Max_ drilling diameter in stainless steel
Suitable for bore diameter
Functions
Min__max_ impact rate
1 More
Max_ cutting depth in aluminium
Min__max_ drilling diameter in concrete
Max_ circumferential speed
Holder plate width _B_
Width _B_
Diameter of sanding plate
Adjustable chisel position
Max_ volume change_conditions
Min__max_ temperature resistance
1 More
Nominal current
Shore A hardness
Max_ cutting depth in wood
Diameter _Ø_
Version
2 More
Short_term resistance against
Max_ grip strength
Material of the housing
Degrees measuring accuracy
Min_ adhesive force at 25 mm
Density
Material of the hose
Max_ change in volume
Impact rate
Impact energy
2 More
Max_ drilling diameter of breakthrough drill in concrete
Max_ chiselling power in concrete
Coating thickness
Compressive shearing strength conditions
Max_ processing temperature
White oil_free_mineral oil_free
Min__max_ processing temperature for can
Connection thread _G_
Length x height
Min__max_ frequency
Conditions for dust_drying time
Min_ grip strength
Diameter
Length in inches
Min_ processing temperature
UV protection
Min__max_ cable diameter
Grid size
Min_ processing temperature for can
Temperature resistance, short_term temperatures max_
Gloss level
Smell_fragrance
Fire protection certified
Conditions to maintain shelf life from production
Fully hardening_curing conditions
Kinematic oil basis viscosity
Segment connection
Shelf life from production
Length x width x height _L x B x H_
Number of magnets
Shore hardness A_conditions
Material of the grip handle
Max_ temperature conditions
Lamp_head diameter
Mechanical strength
Max_ pressure
Material of the handle
EN standard
Isocyanate_free
Weight per metre
Max_ saw_blade diameter
Max_ drilling diameter in wood
Limb length _L_
Temperature resistance, long_term temperatures max_
Cross_cut test conditions
Max_ processing temperature for can
Width across flats _SW_
Min__max_ recommended drilling range for optimum performance _in concrete_
Tip size
Coating weight per m²
Base plate length x base plate width
Limb length 2 _L_
Moisture resistance
Brush thickness
Min__max_ drilling diameter in steel
Conditions for resistance to tearing
Solvent_free
Service life _points system_
Working pressure
Measuring accuracy _per length_
Holder plate length _L_
Cord length
Adhesive base
Max_ curing time
Acid_free
Thickness _t_
Min_ skin_formation time
Max_ idle speed
Versatility _points system_
Performance _points system_
Purity rating zinc
Material
2 More
Elongated hole length _LL_
Min__max_ functional strength
VOC concentration _CH_
Holder plate thickness _t_
Min__max_ line thickness
Min__max_ idle speed
1 More
Segment height
Weight
14 More
Product weight _per item_
1 More
Material of the sound insulation
Additional articles
Min__max_ mitre angle
Nominal diameter _G_
Min_ breaking elongation
Full resilience
Substrates with good adhesion
Max_ rotation speed
1 More
Availability
Packaging Unit
13 More
Categories
Popular tags

Würth Metal

View as Grid List
Sort by
Display per page
Cutting disc for stainless steel - CUTDISC-GREEN-A2-SR-TH1,0-BR22,2-D115MM
0669131150

Cutting disc for stainless steel

Cutting disc for stainless steel CUTDISC-GREEN-A2-SR-TH1,0-BR22,2-D115MM
€1.73 inc. VAT price per 1 PCS
Cutting disc for stainless steel - CUTDISC-GREEN-A2-SR-TH1,0-BR22,2-D125MM
0669131250

Cutting disc for stainless steel

Cutting disc for stainless steel CUTDISC-GREEN-A2-SR-TH1,0-BR22,2-D125MM
€1.90 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M8-(20-25MM)
0865208025

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M8-(20-25MM) TIPP
€5.90 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M8-(45-52MM)
0865208052

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M8-(45-52MM) TIPP
€6.25 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M8-(59-65MM)
0865208065

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M8-(59-65MM) TIPP
€6.96 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M10-(108-118MM)
0865208118

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M10-(108-118MM) TIPP
€14.16 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M10-(120-130MM)
0865208130

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M10-(120-130MM) TIPP
€14.75 inc. VAT price per 1 PCS
Pipe clamp TIPP<SUP>®</SUP> stainless steel A4 - C2C - PIPCLMP-SST-A4-M10-(159-169MM)
0865208169

Pipe clamp TIPP® stainless steel A4 - C2C

A4 stainless steel pipe clamp TIPP PIPCLMP-SST-A4-M10-(159-169MM) TIPP
€15.34 inc. VAT price per 1 PCS
Hammer drill/chipping hammer BMH 45-XE - HAMDRLCHPNGHAM-EL-(BMH 45-XE)
07025571

Hammer drill/chipping hammer BMH 45-XE

Hammer drill/chipping hammer, BMH 45-XE, low-vib. HAMDRLCHPNGHAM-EL-(BMH 45-XE) MASTER
€1,616.60 inc. VAT price per 1 PCS
Chipping hammer MH 10-SE - CHPNGHAM-EL-(MH10-SE)
07025711

Chipping hammer MH 10-SE

Chipping hammer, MH 10-SE CHPNGHAM-EL-(MH10-SE) MASTER MH10-SE
€1,475.00 inc. VAT price per 1 PCS
Chipping hammer MH 11-XE - CHPNGHAM-EL-(MH 11-XE)
07025721

Chipping hammer MH 11-XE

Chipping hammer, MH 11-XE CHPNGHAM-EL-(MH 11-XE) MASTER
€1,947.00 inc. VAT price per 1 PCS
Chipping hammer MH 16-XE - CHPNGHAM-EL-(MH16-XE)
07025751

Chipping hammer MH 16-XE

Chipping hammer, MH 16-XE CHPNGHAM-EL-(MH16-XE) MASTER MH16-XE
€2,112.20 inc. VAT price per 1 PCS

QUICK ORDER

Order quickly by writing Wurth Article No. and Quantity required separated by a comma with one Article No. per line. For example:
89025,5 (Adds Qty 5 of Article No. 89025 to cart)
4172,2 (Adds Qty 2 of Article No. 4172 to cart)

Other Links

About Us

World market leader in the trade with the sale of fastening and assembly materials. It currently consists of more than 400 companies in over 80 countries.

  • visa
  • mastercard
  • paypal
  • revolut

My account

Contact Info

  • Tel: +356 2149 4604
  • WÜRTH Centre, Mdina Road, Zebbug, ZBG 9016
Copyright © 2026 Wurth Malta Online Shop. All rights reserved.
Powered by nopCommerce
Designed by Nop-Templates.com
Close