Wishlist (0)
favorite Wishlist (0)
You have no items in your shopping cart.
Close
Menu
Menu
Filters
Search
favorite Wishlist (0)

Technical chemicals

Picture for category Service products, chemicals

Service products, chemicals

Picture for category Cleaning agents and care products

Cleaning agents and care products

Picture for category Surface Protection, Coatings

Surface Protection, Coatings

Picture for category Building Chemicals

Building Chemicals

Picture for category Adhesives

Adhesives

Picture for category Adhesive Tapes

Adhesive Tapes

Picture for category Sealant

Sealant

Picture for category Lubricants and rust removers

Lubricants and rust removers

Picture for category Sealants

Sealants

Picture for category Filling systems - reusable cans

Filling systems - reusable cans

Refine
×
Price Range
Material compatibility
Ultraviolet resistance
Full curing speed_conditions
4 More
Calculated consumption
Pour point
pH value
24 More
Boron_free
Min__max_ temperature resistance of the hardened material
Min_ temperature conditions
6 More
Behaviour in the presence of water_conditions
Min__max_ initial strength
Sealing_tape thickness on delivery
Conditions for viscosity 2
Conditions for viscosity 1
Roll width
Liquid volume
Width
11 More
Viscosity_consistency
Adhesive force at 25 mm
Free of medium_chain chlorinated paraffins MCCP_ 0,1 %_
Min_ press_setting time of glue
Conditions for resistance in salt_spray test
Resistance in salt_spray test
Conditions for full resilience
Min_ room temperature, material temperature and glue temperature
Contents
45 More
Conditions for skin_formation time
Min_ prevail torque
Drying time
2 More
Wax_free
Min__max prevail torque
Application quantity conditions
Corresponding automobile specifications
Max_ breaking elongation_conditions
Water absorption _%_
Min__max_ working pressure
Dielectric strength
Max_ temperature resistance of the hardened material
Min_ functional strength
AOX_free
Drive_away time conditions
Shrinkage
Max_ open time _conditions
Dry layer thickness _first back_and_forth motion_
Loss factor conditions
Suitable for max_ thread
Max_ coating thickness
Conditions for open time
Compression force deflection conditions
Chlorine_free
Min__max_ viscosity
Can be further processed after min_
Coefficient of thermal expansion
Height
Min_ surface processing temperature
Loose weight
Cell structure
Adhesive tape backing material
Width x height x depth
Conditions for moulded density
Min_ initial strength
Ratio of ingredients
1 More
Min__max_ hardening time _conditions
Conditions for behaviour in the presence of water
Internal diameter
Min__max_ gelation time
Conditions for combined tension and shear resistance
Min__max_ friction
Max_ pressing pressure
Min__max_ processing temperature
19 More
Worked penetration conditions
VKA welding load
1 More
Conditions for viscosity of oil basis
Behaviour in the presence of water
Min_ working life
Hardness Shore A
Sealing thickness conditions
Application conditions
Hexane_free
Chloric
Category
Max_ skin_formation time
Density_conditions
34 More
Min__max_ spraying distance
Drying time_conditions
Adhesive force on steel _per unit of length_
Max_ wood moisture
Specific volume resistivity
Silicone_free
Min_ pressing pressure
Compression set conditions
Min_ temperature resistance
3 More
VOC_free
Min__max_ full curing speed _conditions
Heat conductance λ
Conditions for VKA welding load
Compression strength conditions
Building material class
Min__max_ compressive shearing strength
Elongation at break
9 More
Min__max_ full curing speed
Corrosion protection period conditions
pH_neutral
Hazard class _German Ordinance on Combustible Liquids_
Boiling point
Max_ temperature resistance
13 More
Wear depth
Length of roll
3 More
Backing material
8 More
Min_ curing time
Tack_free after
Weight of machine
Max_ surface processing temperature
Glass transition temperature_conditions
Colour after curing
Load according to four_ball test
Specific Gravity
Dynamic peel strength at 25 mm
Min_ thorough drying
Max_ elongation at break
Heat conductance λ conditions
Min__max_ application quantity in surface bonding
Min_ wet skin_formation time_conditions
Min_ pressure
Viscosity conditions
Min_ combined tension and shear resistance
10 More
Free of phosphoric acid
Max_ open time
Conditions for gelation time
Min_ coating thickness
Max_ water_vapour diffusion resistance factor value µ
Outer diameter
Quantity
Min_ resistance against driving rain _pressure__conditions
Conditions for pH value
Flash_off time conditions
pH value _ conditions
Conditions for being tack_free
Min__max_ shear strength
Relative permittivity
Solid lubricant
Acetone_free
Container
13 More
Cross_cut test
Conditions for ability to cut
Max_ short_term temperature resistance
8 More
Max_ processing time
Resistance against
16 More
Tensile strength
Min__max_ joint width
Softening point
Conditions for tensile shear strength
Min__max_ room temperature, material temperature and glue temperature
Processing temperature
Conditions for working life
Suitable for
Oil absorber type
Skin formation time
Conditions for Shore hardness
Length
27 More
Water_soluble
Min__max_ surface processing temperature
Water absorption conditions
Number of pieces in assortment_set
Connection thread
Weight of content
57 More
Min_ dust_drying time
Min_ skin_formation time _conditions
Thickness of adhesive tape
Drying times _25°C _ 70°F _ 50% U_R__
Sustainability
Min__max_ working life
Min_ temperature resistance of the hardened material
Available colours
Min__max_ skin_formation time _conditions
Conditions for relative permittivity
Max_ friction
Chemical basis
111 More
Min_ longitudinal resistance to tearing
Stretch capacity
Building material class_conditions
Period of use after opening
Max_ working life
Max_ application quantity in surface bonding
Curing time
Full load capacity_conditions
Min__max_ viscosity 2
Min__max_ viscosity 1
Min__max_ ambient processing temperature
Max_ thorough drying
Min__max_ skin_formation time
Temperature Resistance
Colour
143 More
Min__max_ compressive shearing strength _conditions
Conditions for vapour pressure
Recoatable_Can be painted over
Spot weldable
Min__max_ open time _conditions
Max_ gap_filling ability
Max_ yield _area_
Volumetric capacity
Min__max_ sealing thickness
Calculated coverage
Conditions for press_setting time of glue
Min_ processing time
Shelf life from production_conditions
24 More
Min__max_ worked penetration _conditions
Min_ dripping point_conditions
Max_ permissible VOC concentration
Min__max_ temperature conditions
5 More
Storage stability
Full curing speed
Acoustic insulation for joints
Continuous motion absorption _above 150°C_
Min__max_ final strength
Dust_drying time
Thickness
12 More
Stress group
Halogen_free
Removable without residue
Max_ working pressure
Max_ usage duration
Min_ dry skin_formation time_conditions
Min_ breakaway torque
Design
Max_ gluing gap size
Conditions for NLGI grade
pH value_conditions
DIN
Mesh size
Min_ diagonal breaking elongation
Hardener content
Grip strength conditions
Elongation at break_conditions
Min_ tensile strength
6 More
Conditions for through drying
Min__max_ grip strength
Min__max_ relative air humidity
Corrosion protection period
NLGI grade
Conditions for prevail torque
Friction force
Colour number
Conditions for specific volume resistivity
Min__max_ wood moisture outdoors
Min_ flashing point of active ingredient
Soap base
Min_ film forming temperature
Moulded density
Paint_wetting impairment substances
Min_ flashing point
35 More
Type of adhesive
Type of spray head
Min_ drying time
Can be cut after
Long_term elasticity
Free of scrap tyre granules
Resin_free
Dripping point conditions
Min_ spraying distance
Min__max_ joint width for watertightness in driving rain
Continuous motion absorption
Conditions for tensile strength
Min__max_ viscosity _conditions
Nominal diameter
Compression strength
Flashing point conditions
Fungicidal properties
Curing time conditions
Water_vapour permeability
Number per pallet
Min_ yield _area_
Loss factor
Adhesive force at 10 mm
Foil thickness
Conditions for VOC concentration
Max_ flash_off time
Can be sanded after
PVC_free
Max_ tensile strength
Surface tension
Max_ volume change_conditions
Water_vapour diffusion resistance factor value µ
Min__max_ temperature resistance
32 More
Shore A hardness
7 More
Bio_degradable_conditions
Diameter _Ø_
Version
14 More
Short_term resistance against
2 More
Max_ grip strength
Continuous motion absorption _up to 150°C_
Min_ compressive strength
Free of long_chain chlorinated paraffins LCCP _ 0,1 %_
Min_ adhesive force at 25 mm
Density
102 More
Conditions for water_vapour permeability
Material of the hose
Coats
Max_ change in volume
Conditions for thorough drying
Max_ spraying distance
Breakaway torque conditions
Min__max_ wood moisture
Min_ final strength
Coating thickness
Min__max_ flash_off time
Compressive shearing strength conditions
Max_ processing temperature
2 More
Min_ proportion of solids
White oil_free_mineral oil_free
Dielectric strength conditions
Breaking elongation conditions
Ignition temperature
Min__max_ processing temperature for can
Yield _volume_ approx_
Free from heavy metals
Conditions for dust_drying time
Range of applications
Breaking elongation
Min_ grip strength
Diameter
Scale
Coating compatibility
Final spreading possible after
Min__max_ tensile strength
Min_ processing temperature
2 More
Min_ processing temperature for can
Application temperature
Density conditions
Gloss level
Phosphate_free
Smell_fragrance
14 More
Straßen_Rutsch_Test _German road slip test_
Conditions for functional strength
Surface pre_treatment required
Friction force conditions
Viscosity
3 More
Conditions to maintain shelf life from production
25 More
CFC _fuel gas_ free
Fully hardening_curing conditions
Mineral oil_free
Max_ drying time
Max_ VOC concentration
Grip strength
Kinematic oil basis viscosity
9 More
Shelf life from production
6 More
Min__max_ breakaway torque
Dry film thickness
Min__max_ tensile strength _conditions
Shore hardness A_conditions
Material of the grip handle
Max_ temperature conditions
11 More
Working life
Conditions for softening point
Max_ pressure
Isocyanate_free
Granulate grid
Barrier layer
Building material class conditions
Compression set
Min_ strand diameter
Max_ strand diameter
Max_ proportion of solids
Soap_free
Cross_cut test conditions
Max_ processing temperature for can
Max_ functional strength
Min__max_ curing time
Max_ final strength
Conditions for drying time
Max_ flow rate
Min_ friction
Conditions for final spreading
Flow capacity
Min_ flash_off time
Min__max_ pressing pressure
Curing time_conditions
Moisture resistance
Width of band
Min_ wood moisture
Conditions for resistance to tearing
Number of pieces
Processing time
Coefficient of thermal expansion conditions
Tensile shear strength
Base oil viscosity, kinematic_conditions
Solvent_free
Oil basis
1 More
Working pressure
Shore D hardness
Adhesive base
3 More
Application quantity per running metre_conditions
Bio_degradable
Max_ curing time
Min__max_ application quantity in assembly bonding
Cell structure conditions
Corrosion protection period_category
Conditions for load according to four_ball test
Acid_free
Max_ dust_drying time
Min_ skin_formation time
7 More
Conditions for yield
Conditions for final strength
Total thickness
Unleaded
Propellant
Free of short_chain chlorinated paraffins SCCP _ 0,1 %_
Performance _points system_
Min_ open time
Loss of mass
Purity rating zinc
Min_ dripping point
Elongation at break conditions
Min__max_ open time
Material
9 More
Min__max_ functional strength
NLGI grade_conditions
VOC concentration _CH_
12 More
Min_ transverse tensile strength
Lubricant system
Vapour pressure
Product weight _per item_
20 More
Compression force deflection
Can be varnished after
Additional articles
Worked penetration
Lubricant code
Min_ breaking elongation
4 More
Full resilience
Min__max_ operating pressure
Substrates with good adhesion
Availability
Packaging Unit
23 More
Categories
Popular tags

Technical chemicals

View as Grid List
Sort by
Display per page
Picture of ASSEMBLY ADHESIVE BONDS ALL
1893160190

ASSEMBLY ADHESIVE BONDS ALL

Colour: transparent. Contents: 60 ml. MS-polymer based flexible structural adhesive and sealant.
€4.74 inc. VAT price per 1 PCS
Active glass cleaner - WSCRNCLNR-ACTIVE-500ML
089025

Active glass cleaner

Active windscreen cleaner WSCRNCLNR-ACTIVE-500ML
€4.20 inc. VAT price per 1 PCS
Picture of ELECTRIC INSULATING TAPES RED
09851

ELECTRIC INSULATING TAPES RED

Width : 19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES BLUE
09852

ELECTRIC INSULATING TAPES BLUE

Width ; 19 mm.Safe insulation and marking during electrical installation.
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES GREEN/YELLOW
098521

ELECTRIC INSULATING TAPES GREEN/YELLOW

Width: 19 mm.Safe insulation and marking during electrical installation
€6.73 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES GREEN
09853

ELECTRIC INSULATING TAPES GREEN

Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES YELLOW
09854

ELECTRIC INSULATING TAPES YELLOW

Width:19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES GREY
09855

ELECTRIC INSULATING TAPES GREY

Width: 19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES BLACK
09856

ELECTRIC INSULATING TAPES BLACK

Width : 19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES WHITE
09858

ELECTRIC INSULATING TAPES WHITE

Width : 19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPES BROWN
09859

ELECTRIC INSULATING TAPES BROWN

Width: 19 mm.Safe insulation and marking during electrical installation
€6.02 inc. VAT price per 10 PCS
Picture of ELECTRIC INSULATING TAPE BLACK
098530

ELECTRIC INSULATING TAPE BLACK

Width: 30 mm.Safe insulation and marking during electrical installation
€3.19 inc. VAT price per 1 PCS

QUICK ORDER

Order quickly by writing Wurth Article No. and Quantity required separated by a comma with one Article No. per line. For example:
89025,5 (Adds Qty 5 of Article No. 89025 to cart)
4172,2 (Adds Qty 2 of Article No. 4172 to cart)

Other Links

About Us

World market leader in the trade with the sale of fastening and assembly materials. It currently consists of more than 400 companies in over 80 countries.

  • visa
  • mastercard
  • paypal
  • revolut

My account

Contact Info

  • Tel: +356 2149 4604
  • WÜRTH Centre, Mdina Road, Zebbug, ZBG 9016
Copyright © 2026 Wurth Malta Online Shop. All rights reserved.
Powered by nopCommerce
Designed by Nop-Templates.com
Close