Wishlist (0)
favorite Wishlist (0)
You have no items in your shopping cart.
Close
Menu
Menu
Filters
Search
favorite Wishlist (0)

Technical chemicals

Picture for category Service products, chemicals

Service products, chemicals

Picture for category Cleaning agents and care products

Cleaning agents and care products

Picture for category Surface Protection, Coatings

Surface Protection, Coatings

Picture for category Building Chemicals

Building Chemicals

Picture for category Adhesives

Adhesives

Picture for category Adhesive Tapes

Adhesive Tapes

Picture for category Sealant

Sealant

Picture for category Lubricants and rust removers

Lubricants and rust removers

Picture for category Sealants

Sealants

Picture for category Filling systems - reusable cans

Filling systems - reusable cans

Refine
×
Price Range
Material compatibility
Ultraviolet resistance
Full curing speed_conditions
4 More
Pour point
Min__max_ temperature resistance of the hardened material
Behaviour in the presence of water_conditions
Conditions for viscosity 2
Conditions for viscosity 1
Viscosity_consistency
Adhesive force at 25 mm
Free of medium_chain chlorinated paraffins MCCP_ 0,1 %_
Conditions for resistance in salt_spray test
Resistance in salt_spray test
Conditions for full resilience
Min_ prevail torque
Min__max prevail torque
Corresponding automobile specifications
Min__max_ working pressure
Dielectric strength
Min_ functional strength
AOX_free
Max_ open time _conditions
Loss factor conditions
Min__max_ viscosity
Can be further processed after min_
Min_ surface processing temperature
Loose weight
Adhesive tape backing material
Width x height x depth
Conditions for moulded density
Min__max_ gelation time
Conditions for combined tension and shear resistance
Min__max_ friction
Max_ pressing pressure
Min__max_ processing temperature
20 More
Worked penetration conditions
Hardness Shore A
Chloric
Category
Max_ skin_formation time
Density_conditions
35 More
Min__max_ spraying distance
Adhesive force on steel _per unit of length_
Min_ pressing pressure
Compression set conditions
VOC_free
Min__max_ full curing speed _conditions
Heat conductance λ
Building material class
Elongation at break
9 More
Min__max_ full curing speed
pH_neutral
Hazard class _German Ordinance on Combustible Liquids_
Max_ temperature resistance
13 More
Wear depth
Min_ curing time
Glass transition temperature_conditions
Colour after curing
Load according to four_ball test
Dynamic peel strength at 25 mm
Min_ thorough drying
Max_ elongation at break
Min_ pressure
Viscosity conditions
Free of phosphoric acid
Max_ water_vapour diffusion resistance factor value µ
Outer diameter
Quantity
Conditions for pH value
Flash_off time conditions
pH value _ conditions
Conditions for being tack_free
Min__max_ shear strength
Relative permittivity
Solid lubricant
Acetone_free
Conditions for working life
Suitable for
Skin formation time
Conditions for Shore hardness
Length
27 More
Water_soluble
Min__max_ surface processing temperature
Number of pieces in assortment_set
Connection thread
Min_ skin_formation time _conditions
Thickness of adhesive tape
Sustainability
Min__max_ working life
Min_ temperature resistance of the hardened material
Available colours
Min__max_ skin_formation time _conditions
Conditions for relative permittivity
Chemical basis
117 More
Min_ longitudinal resistance to tearing
Stretch capacity
Max_ working life
Max_ application quantity in surface bonding
Curing time
Full load capacity_conditions
Min__max_ viscosity 2
Min__max_ viscosity 1
Max_ thorough drying
Temperature Resistance
Colour
149 More
Conditions for vapour pressure
Min__max_ open time _conditions
Min__max_ sealing thickness
Conditions for press_setting time of glue
Shelf life from production_conditions
24 More
Min_ dripping point_conditions
Max_ permissible VOC concentration
Min__max_ temperature conditions
5 More
Full curing speed
Continuous motion absorption _above 150°C_
Min__max_ final strength
Thickness
12 More
Stress group
Halogen_free
Min_ dry skin_formation time_conditions
Min_ breakaway torque
Design
Max_ gluing gap size
pH value_conditions
Hardener content
Grip strength conditions
Min__max_ grip strength
Min__max_ relative air humidity
Corrosion protection period
Min_ flashing point of active ingredient
Soap base
Moulded density
Type of adhesive
Min_ drying time
Free of scrap tyre granules
Resin_free
Dripping point conditions
Min_ spraying distance
Continuous motion absorption
Min__max_ viscosity _conditions
Nominal diameter
Compression strength
Flashing point conditions
Fungicidal properties
Water_vapour permeability
Number per pallet
Min_ yield _area_
Loss factor
Adhesive force at 10 mm
Foil thickness
Max_ flash_off time
Can be sanded after
PVC_free
Surface tension
Min__max_ temperature resistance
32 More
Bio_degradable_conditions
Diameter _Ø_
Version
14 More
Max_ grip strength
Free of long_chain chlorinated paraffins LCCP _ 0,1 %_
Min_ adhesive force at 25 mm
Max_ change in volume
Min__max_ wood moisture
Min_ final strength
Compressive shearing strength conditions
Max_ processing temperature
2 More
Breaking elongation conditions
Ignition temperature
Free from heavy metals
Min_ grip strength
Coating compatibility
Final spreading possible after
Min_ processing temperature
2 More
Gloss level
Phosphate_free
Smell_fragrance
17 More
Straßen_Rutsch_Test _German road slip test_
Friction force conditions
Viscosity
4 More
Conditions to maintain shelf life from production
25 More
CFC _fuel gas_ free
Mineral oil_free
Grip strength
Kinematic oil basis viscosity
10 More
Min__max_ breakaway torque
Dry film thickness
Material of the grip handle
Max_ temperature conditions
11 More
Barrier layer
Min_ strand diameter
Max_ strand diameter
Soap_free
Cross_cut test conditions
Max_ processing temperature for can
Max_ final strength
Conditions for drying time
Max_ flow rate
Min_ flash_off time
Moisture resistance
Min_ wood moisture
Coefficient of thermal expansion conditions
Tensile shear strength
Base oil viscosity, kinematic_conditions
Oil basis
1 More
Working pressure
Shore D hardness
Application quantity per running metre_conditions
Max_ curing time
Acid_free
Conditions for yield
Unleaded
Propellant
Free of short_chain chlorinated paraffins SCCP _ 0,1 %_
Performance _points system_
Min_ dripping point
Elongation at break conditions
Min__max_ open time
NLGI grade_conditions
Vapour pressure
Product weight _per item_
22 More
Compression force deflection
Can be varnished after
Additional articles
Worked penetration
Min_ breaking elongation
4 More
Substrates with good adhesion
Calculated consumption
pH value
26 More
Boron_free
Min_ temperature conditions
6 More
Min__max_ initial strength
Sealing_tape thickness on delivery
Roll width
Liquid volume
Width
11 More
Min_ press_setting time of glue
Min_ room temperature, material temperature and glue temperature
Contents
45 More
Conditions for skin_formation time
Drying time
2 More
Wax_free
Application quantity conditions
Max_ breaking elongation_conditions
Water absorption _%_
Max_ temperature resistance of the hardened material
Drive_away time conditions
Shrinkage
Dry layer thickness _first back_and_forth motion_
Suitable for max_ thread
Max_ coating thickness
Conditions for open time
Compression force deflection conditions
Chlorine_free
Coefficient of thermal expansion
Height
Cell structure
Min_ initial strength
Ratio of ingredients
1 More
Min__max_ hardening time _conditions
Conditions for behaviour in the presence of water
Internal diameter
VKA welding load
1 More
Conditions for viscosity of oil basis
Behaviour in the presence of water
Min_ working life
Sealing thickness conditions
Application conditions
Hexane_free
Drying time_conditions
Max_ wood moisture
Specific volume resistivity
Silicone_free
Min_ temperature resistance
3 More
Conditions for VKA welding load
Compression strength conditions
Min__max_ compressive shearing strength
Corrosion protection period conditions
Boiling point
Length of roll
3 More
Backing material
8 More
Tack_free after
Weight of machine
Max_ surface processing temperature
Specific Gravity
Heat conductance λ conditions
Min__max_ application quantity in surface bonding
Min_ wet skin_formation time_conditions
Min_ combined tension and shear resistance
10 More
Max_ open time
Conditions for gelation time
Min_ coating thickness
Min_ resistance against driving rain _pressure__conditions
Container
13 More
Cross_cut test
Conditions for ability to cut
Max_ short_term temperature resistance
8 More
Max_ processing time
Resistance against
16 More
Tensile strength
Min__max_ joint width
Softening point
Conditions for tensile shear strength
Min__max_ room temperature, material temperature and glue temperature
Processing temperature
Oil absorber type
Water absorption conditions
Weight of content
58 More
Min_ dust_drying time
Drying times _25°C _ 70°F _ 50% U_R__
Max_ friction
Building material class_conditions
Period of use after opening
Min__max_ ambient processing temperature
Min__max_ skin_formation time
Min__max_ compressive shearing strength _conditions
Recoatable_Can be painted over
Spot weldable
Max_ gap_filling ability
Max_ yield _area_
Volumetric capacity
Calculated coverage
Min_ processing time
Min__max_ worked penetration _conditions
Storage stability
Acoustic insulation for joints
Dust_drying time
Removable without residue
Max_ working pressure
Max_ usage duration
Conditions for NLGI grade
DIN
Mesh size
Min_ diagonal breaking elongation
Elongation at break_conditions
Min_ tensile strength
6 More
Conditions for through drying
NLGI grade
Conditions for prevail torque
Friction force
Colour number
Conditions for specific volume resistivity
Min__max_ wood moisture outdoors
Min_ film forming temperature
Paint_wetting impairment substances
Min_ flashing point
42 More
Type of spray head
Can be cut after
Long_term elasticity
Min__max_ joint width for watertightness in driving rain
Conditions for tensile strength
Curing time conditions
Conditions for VOC concentration
Max_ tensile strength
Max_ volume change_conditions
Water_vapour diffusion resistance factor value µ
Shore A hardness
7 More
Short_term resistance against
2 More
Continuous motion absorption _up to 150°C_
Min_ compressive strength
Density
111 More
Conditions for water_vapour permeability
Material of the hose
Coats
Conditions for thorough drying
Max_ spraying distance
Breakaway torque conditions
Coating thickness
Min__max_ flash_off time
Min_ proportion of solids
White oil_free_mineral oil_free
Dielectric strength conditions
Min__max_ processing temperature for can
Yield _volume_ approx_
Conditions for dust_drying time
Range of applications
Breaking elongation
Diameter
Scale
Min__max_ tensile strength
Min_ processing temperature for can
Application temperature
Density conditions
Conditions for functional strength
Surface pre_treatment required
Fully hardening_curing conditions
Max_ drying time
Max_ VOC concentration
Shelf life from production
6 More
Min__max_ tensile strength _conditions
Shore hardness A_conditions
Working life
Conditions for softening point
Max_ pressure
Isocyanate_free
Granulate grid
Building material class conditions
Compression set
Max_ proportion of solids
Max_ functional strength
Min__max_ curing time
Min_ friction
Conditions for final spreading
Flow capacity
Min__max_ pressing pressure
Curing time_conditions
Width of band
Conditions for resistance to tearing
Number of pieces
Processing time
Solvent_free
Adhesive base
4 More
Bio_degradable
Min__max_ application quantity in assembly bonding
Cell structure conditions
Corrosion protection period_category
Conditions for load according to four_ball test
Max_ dust_drying time
Min_ skin_formation time
7 More
Conditions for final strength
Total thickness
Grain size
Min_ open time
Loss of mass
Purity rating zinc
Material
9 More
Min__max_ functional strength
VOC concentration _CH_
13 More
Min_ transverse tensile strength
Complex_free
Lubricant system
Lubricant code
Full resilience
Min__max_ operating pressure
Availability
Packaging Unit
23 More
Categories
Popular tags

Technical chemicals

View as Grid List
Sort by
Display per page
Picture of MASKING TAPE
9925038

MASKING TAPE

Width (mm): 38. Length (m): 50. Thickness (mm): 0.13. Paper masking tape for general masking applications.
€2.69 inc. VAT price per 1 PCS
Picture of SUPER FAST GLUE
8934110

SUPER FAST GLUE

Klebfix Super Fast Glue is specially formulated to give superior bonds on common substrates. It works on acidic and porous substrates where other cyanoacrylates fail to bond.
€2.97 inc. VAT price per 1 PCS
Picture of Hand Cleansing Paste
893955210

Hand Cleansing Paste

Contents/ml: 1000. Sand free hand cleaner.
€4.31 inc. VAT price per 1 PCS
Picture of Hand Cleansing Paste
893955211

Hand Cleansing Paste

Contents/ml: 4000. Sand free hand cleaner.
€13.07 inc. VAT price per 1 PCS
Picture of GRAVITY FEED SPRAY GUNS HVLP GOLD
89170013

GRAVITY FEED SPRAY GUNS HVLP GOLD

Nozzle Size: 1.3. Nozzle Size (mm): 1.3. HVLP Gravity Feed Spray Gun Our best selling budget gravity feed spray gun.
€82.60 inc. VAT price per 1 PCS
Picture of SILICONE ACETATE
892317160

SILICONE ACETATE

Designation: Transparent. Contents(ml): 60. For tile joints with medium loading for indoor and outdoor use.
€3.30 inc. VAT price per 1 PCS
Picture of SILICONE ACETATE
892317260

SILICONE ACETATE

Designation: White. Contents(ml): 60. For tile joints with medium loading for indoor and outdoor use.
€2.95 inc. VAT price per 1 PCS
Picture of SILICONE ACETATE
8923176

SILICONE ACETATE

Designation: Black. Contents(ml): 310. For tile joints with medium loading for indoor and outdoor use.
€5.95 inc. VAT price per 1 PCS
Picture of UNIVERSAL WOOD FILLER
890303200

UNIVERSAL WOOD FILLER

Colour: White. Contents: 1kg. One-component water-based filler for grouting of wood and masonry before painting.
€5.31 inc. VAT price per 1 PCS
Picture of UNIVERSAL WOOD FILLER
890303201

UNIVERSAL WOOD FILLER

Colour: Pine. Contents: 1kg. One-component water-based filler for grouting of wood and masonry before painting.
€5.31 inc. VAT price per 1 PCS
Picture of UNIVERSAL WOOD FILLER
890303202

UNIVERSAL WOOD FILLER

Colour: Ash. Contents: 1kg. One-component water-based filler for grouting of wood and masonry before painting.
€5.31 inc. VAT price per 1 PCS
Picture of UNIVERSAL WOOD FILLER
890303203

UNIVERSAL WOOD FILLER

Colour: Medium Oak. Contents: 1kg. One-component water-based filler for grouting of wood and masonry before painting.
€5.31 inc. VAT price per 1 PCS

QUICK ORDER

Order quickly by writing Wurth Article No. and Quantity required separated by a comma with one Article No. per line. For example:
89025,5 (Adds Qty 5 of Article No. 89025 to cart)
4172,2 (Adds Qty 2 of Article No. 4172 to cart)

Other Links

About Us

World market leader in the trade with the sale of fastening and assembly materials. It currently consists of more than 400 companies in over 80 countries.

  • visa
  • mastercard
  • paypal
  • revolut

My account

Contact Info

  • Tel: +356 2149 4604
  • WÜRTH Centre, Mdina Road, Zebbug, ZBG 9016
Copyright © 2026 Wurth Malta Online Shop. All rights reserved.
Powered by nopCommerce
Designed by Nop-Templates.com
Close